|
Academic Year |
International Journals |
National Journals |
International Conference |
National Conference |
Book Chapters |
Total |
|
2020-2021 |
37 |
13 |
6 |
– |
6 |
62 |
|
2019-2020 |
30 |
6 |
5 |
– |
4 |
45 |
|
2018-2019 |
17 |
10 |
4 |
– |
2 |
33 |
|
2017-2018 |
40 |
5 |
10 |
4 |
– |
59 |
|
2016-2017 |
36 |
3 |
14 |
– |
– |
53 |
|
2015-2016 |
37 |
1 |
11 |
13 |
– |
62 |
|
2014-2015 |
24 |
– |
3 |
2 |
– |
29 |
|
Total |
221 |
38 |
53 |
19 |
12 |
343 |
Academic Year 2020 -2021 (International Journals)
|
Sl.No |
Description of paper with link |
|
1 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode (I/II) load using FPB specimen.” Frattura ed Integrità Strutturale, Volume 14, Issue 53, Pages 426-433, July 2020. (ESCI & SCOPUS) https://www.fracturae.com/index.php/fis/article/view/2796/3049 |
|
2 |
V. Rajender Kumar, P. V. Ramana. “CFD Analysis of Heat transfer Enhancement in a Horizontal Circular Tube using Rectangular type Insert in Turbulent Region.” International Journal of Scientific Development and Research, Volume 5, Issue 7, Pages 139-149, July 2020. (SCOPUS) |
|
3 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, Venkat Phani Kumar Pasunuri, and Sriteja Salike. “Modeling of tool wear in machining of AISI 52100 steel using artificial neural networks.” Materials Today: Proceedings, July 2020. (SCOPUS) |
|
4 |
Uma Maheshwera Reddy Paturi, and Suryapavan Cheruku. “Application and performance of machine learning techniques in manufacturing sector from the past two decades: A review.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
5 |
Rajneesh Kumar, Manjeet Kharub, Vidyanand Kumar, and Varun. “Heat augmented due to array of protrusions on absorber plate in solar heat exchanger.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
6 |
P. V. Ramana, Manjeet Kharub, Jaspreet Singh, and Jagdeep Singh. “On material removal and tool wear rate in powder contained electric discharge machining of die steels.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
7 |
Satyender Singh, Manjeet Kharub, Jagdeep Singh, Jaspreet Singh, and Vivek Jangid. “Brief survey on mechanical failure and preventive mechanism of turbine blades.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
8 |
A. Suresh, and G. Diwakar. “Optimization of process parameters in plasma arc cutting for TWIP steel plates.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
9 |
Sowjanya Madireddi. “Effect of offset of the crucible center with wheel center during planar-flow-melt-spinning process.” Materials Today: Proceedings, August 2020. (SCOPUS) |
|
10 |
Manjeet Kharub. “Integrating the HACCP and SPC for hazard control and process improvement: a case of pharmaceutical industry.” International Journal of Pharmaceutical and Healthcare Marketing, September 2020. (ESCI & SCOPUS) |
|
11 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Study on translaminar fracture toughness under mixed mode I/II load for (0/45)° orientation unidirectional glass/epoxy composite.” Materials Today: Proceedings, September 2020. (SCOPUS) |
|
12 |
Uma Maheshwera Reddy Paturi, Sumanth Methuku, Sumanth S. Siripragada, Yeshwanth Sangishetty, and Rakesh Kumar Gunda. “Finite element simulations of machinability parameters in turning of Inconel 718.” Materials Today: Proceedings, September 2020. (SCOPUS) |
|
13 |
Uma Maheshwera Reddy Paturi, Suryapavan Cheruku, and Satwik Reddy Geereddy. “Process modeling and parameter optimization of surface coatings using artificial neural networks (ANNs): State-of-the-art review.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
14 |
C. Anand Badrish, Ayush Morchhale, Nitin Kotkunde, Swadesh Kumar Singh, and Uma Maheshwera Reddy Paturi. “Influence of lubrication on forming limit diagram for Inconel 625 alloy at elevated temperatures.” Materials Today: Proceedings (2020). (SCOPUS) |
|
15 |
Uma Maheshwera Reddy Paturi, Harish Devarasetti, N. S. Reddy, Nitin Kotkunde, and B. K. Patle. “Modeling of surface roughness in wire electrical discharge machining of Inconel 718 using artificial neural network.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
16 |
Brijesh Patel, B. K. Patle, and UM Reddy Paturi. “Experimental investigation of fatigue life of Inconel 617 at elevated temperature.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
17 |
A. Suresh, P. Bhargavi, and M. Kiran Kumar. “Simulation and mechanical characterization on kevlar epoxy reinforced composite with silicon carbide filler.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
18 |
M. Venkata Ramana, G. V. Rao, B. Shankar Rao, and B. Shiva Prasad. “Design & development of durable low cost housing from glass fiber composites.” Materials Today: Proceedings, October 2020. (SCOPUS) |
|
19 |
M. Venkata Ramana, C. Sai Kiran, and Veeredhi Vasudeva Rao. “Experimental investigation on the time-temperature history of Al-Si alloy while cooling in fresh and reclaimed silicate sand mould.” Materials Today: Proceedings, October 2020 (SCOPUS) |
|
20 |
G. Naveen Kumar, Bader Al-Aifan, R. Parameshwaran, and V. Vinayaka Ram. “Facile synthesis of microencapsulated 1-dodecanol/melamine-formaldehyde phase change material using in-situ polymerization for thermal energy storage.” Colloids and Surfaces A: Physicochemical and Engineering Aspects: 125698, October 2020. (SCIE & SCOPUS) |
|
21 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Experimental investigation to evaluate total energy release rate for unidirectional glass/epoxy composite under Mixed mode-I/II load.” Sādhanā, Volume 45, Issue 1, Pages 1-8, October 2020. (SCIE & SCOPUS) |
|
22 |
Sowjanya Madireddi, P. Ashish, B. Arvind Reddy, and D. Abhishek. “Heat transfer analysis of a multilayered fabric-material assembly exposed to halogen lamp heating.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
23 |
Saikiran Chary Nalband, Kalyan Pamidimukkala, Rakesh Kumar Gunda, and Uma Maheshwera Reddy Paturi. “Effect of minimum quantity solid lubrication (MQSL) parameters on cutting force and temperature during turning of EN31 steel.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
24 |
Neeraj Kumar Jha, G. Avinash, and V. Siddharth. “Design and structural analysis of plastic chain link with polypropylene and polyoxymethylene material.” Materials Today: Proceedings, November 2020. (SCOPUS) |
|
25 |
Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh. “Design and Analysis of Leaf Spring for Material Optimization.” International Journal of Engineering and Techniques, Volume 6, Issue 6, Pages 1-5, November 2020. |
|
26 |
A.L.N. Arun Kumar, T. Venkatesh, Sk. Mohammad Shareef. “Structural Analysis of Regenerative Braking System.” International Journal of Engineering and Techniques, Volume 6, Issue 6, Pages 1-6, November 2020. |
|
27 |
P. Srinivas Reddy. “Transformation of Existing SI Engine to Work with Pressurized Air.” International Journal for Modern Trends in Science and Technology, Volume 6, Issue 11, Pages 79-86, November 2020. |
|
28 |
T. Venkatesh, Sk. Mohammad Shareef, A. L. N. Arun Kumar. “Design and Analysis of Crane Hook with Different Materials.” International Journal of Trend in Scientific Research and Development, Volume 5, Issue 1, Pages 802-807, December 2020. |
|
29 |
Mr. A. Suresh, Ms. G. Rithika, Ms. J. Srujana, Mr. M. Pavan Kumar Reddy. “Evaluating the Effects of Residual Stresses on CNC Turning For TWIP Steel Plates.” International Research Journal of Modernization in Engineering Technology and Science, Volume 2, Issue 12, Pages 182-188, December 2020. https://irjmets.com/rootaccess/forms/uploads/IRJMETS108584.pdf |
|
30 |
Marripally Ravikumar. “Investigation on the Creep Behaviour of Friction Stir Processed Al-Ni Composite Material.” International Journal of Trend in Scientific Research and Development, Volume 5, Issue 1, Pages 1126-1129, December 2020. |
|
31 |
Velpuri Lavanya, M Venkata Ramana. “Stress Analysis on Lumbar Vertebrae.” International Journal of Advance Research and Innovative Ideas in Education, Volume 6, Issue 6, Pages 2240-2244, December 2020. |
|
32 |
Vidyanand Kumar, Animesh Sinha, Rajesh Kumar. “Investigation of FSW Process Parameters by Taguchi Method of 6061- 6082 Aluminium alloys.” International Journal of Advance Research and Innovative Ideas in Education, Volume 6, Issue 6, Pages 1074-1080, December 2020. http://ijariie.com/AdminUploadPdf/INVESTIGATION_OF_FSW_PROCESS |
|
33 |
Rajesh Kumar, Vidyanand Kumar, Animesh Sinha. “2-D Heat Conduction Analysis of a Square Slab for Steady and Transient Behaviour Using Various Iterative Solvers.” International Journal of Scientific Research and Engineering Development, Volume 3, Issue 6, Pages 1218-1223, December 2020. |
|
34 |
Uma Maheshwera Reddy Paturi, G. Naveen Kumar, and V. S. Vamshi. “Silver nanoparticle-based Tween 80 green cutting fluid (AgNP-GCF) assisted MQL machining-An attempt towards eco-friendly machining.” Cleaner Engineering and Technology, Volume 1, Article 100025, December 2020. |
|
35 |
Effect of Tool Material on Mechanical Properties of Friction Stir Welded Dissimilar Aluminium Joints, Materials Today: Proceedings (SCOPUS) |
|
36 |
Effect of friction-stir welding parameters on the welding, Materials Today: Proceedings (SCOPUS) |
|
37 |
Optimization of Process parameters based on RSM and GRA method for Machining of Inconel-600 by Electric Discharge Machining, Materials Today: Proceedings (SCOPUS) |
Academic Year 2020 -2021 (National Journals)
Sl no | Description of paper with link |
1 | P. Lava Kumar. “Yttrium Chloride as Corrosion Inhibitor for 6061Al- SiC Composites in 1:1 mixture of HNO3 + HCl.” CVR Journal of Science and Technology, Volume 18, Pages 119-123, June 2020. |
2 | A. Suresh. “Hazard Rate Diagnosis of Heavy Earth Moving Machinery using 2-parameter Weibull Analysis.” CVR Journal of Science and Technology, Volume 18, Pages 124-131, June 2020. |
3 | Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh. “CFD Analysis of DI Diesel Engine using Exhaust Gas Recirculation.” CVR Journal of Science and Technology, Volume 18, Pages 132-137, June 2020. |
4 | Pathalavathi Bhaskar, Sarat Kumar Sahoo. “Optimization of Machining Process by Desirability Function Analysis (DFA): A Review.” CVR Journal of Science and Technology, Volume 18, Pages 138-143, June 2020. |
5 | Jagdeep Singh, Manjeet Kharub and Sarat Kumar Sahoo. “Analysis of Powder-Mixed EDM Process Characteristics of Tungsten Carbide alloy by Using GRA Technique.” CVR Journal of Science and Technology, Volume 19, Pages 102-106, December 2020. |
6 | M. Udaya Kiran, Sk. Mohammad Shareef and A. L. N. Arun Kumar. “Study of Condensation on PDMS Substrates for Enhanced Solar Still.” CVR Journal of Science and Technology, Volume 19, Pages 107-112, December 2020. |
7 | C. Sai Kiran, M. Ravi Kumar, P. Srinivas Reddy and T. Venkatesh. “Modelling and Analysis of Brake Drum using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 19, Pages 113-117, December 2020. |
8 | Sk. Mohammad Shareef, A.L.N. Arun Kumar, T. Venkatesh and M. RaviKumar. “Performance and Emission Characteristics of Diesel Engine by Semi Ellipsoidal Arc Grooves on Piston Crown.” CVR Journal of Science and Technology, Volume 19, Pages 118-122, December 2020. |
9 | Vidyanand Kumar, Dr. Manjeet Kharub and Neeraj Kumar Jha. “Parametric Optimization of Submerged Arc Welding using Taguchi Method on P91 Steel.” CVR Journal of Science and Technology, Volume 19, Pages 123-128, December 2020. |
10 | Mada Rukmi Sai Rupa Sri and N. Ankitha. “Modelling of a Banana Fiber Extraction Machine.” CVR Journal of Science and Technology, Volume 19, Pages 129-132, December 2020. |
11 | T. Venkatesh, A. L. N. Arun Kumar, Sk. Mohammad Shareef and P. Lava Kumar. “Structural Analysis of Centrfugal Compressor Impeller using ANSYS.” CVR Journal of Science and Technology, Volume 19, Pages 133-137, December 2020. |
12 | P. Srinivas Reddy. “Enery Audit Along with Energy Saving Implementations for HVAC Systems.” CVR Journal of Science and Technology, Volume 19, Pages 138-143, December 2020. |
13 | A. Suresh, Dr. G. Diwakar and B. Appala Naidu. “Reliability Design and Maintenance Formulation for Dumpers used in Mining Industries.” CVR Journal of Science and Technology, Volume 19, Pages 144-150, December 2020. |
Academic Year 2020 -2021 (International Conferences)
slno | Description of paper with link |
1 | Mada Rukmini Sai Rupa Sri, Sk. Mohammad Shareef, N. Ankitha, Design and Fabrication of Solar Powered Grass Cutting Machine, International Conference on Recent Advances in Mechanical, Civil & Electrical Engineering, ICRAMCE 2020, St. Martin’s Engineering College, Secunderabad, 19-20 June 2020. https://www.smec.ac.in/assets/images/ICRAMCE%20-%202020%20Proceedings.pdf |
2 | Mada Rukmini Sai Rupa Sri, Mohammad Shareef Sk & Ankitha N, Design and Structural Analysis of IC Engine Piston, First International Virtual Conference on Advanced Materials and Manufacturing Process, Kalasalingam Academy of Research and Education, Tamil Nadu, 20th June 2020. |
3 | Sk Mohammad Shareef, A.L.N Arun Kumar, T. Venkatesh. “Experimental Investigation of Semi Elliptical arc groves on Piston crown of Direct Injection Diesel Engine using Apricot oil.” International Conference on Advances in Sustainable Technologies ICAST-2020, Lovely Professional University, Punjab, 6th – 7th November 2020. |
4 | P.Sadanandam, P.Srinivas Reddy and Vijaya Sarathi Timmapuram. “Stress distribution on turbine blade along with root at several operating speeds.” 1st International Conference on Research and Advances in Mechanical Engineering, Vignan Institute of Technology and Science, Deshmukhi, 10th & 11th December 2020. |
5 | Vidyanand Kumar, Manjeet Kharub, Animesh Sinha. “Modeling and Optimization of Turning Parameters during Machining of AA6061 composite using RSM Box-Behnken Design.” International Conference on Research and Advances in Mechanical Engineering, Vignan Institute of Technology and Science, Deshmukhi, 10th & 11th December 2020. |
6 | Fifth International Online Conference on Reuse and Recycling of Materials (Polymers, Wood, Paper, Leather, Glass, Metals, Ceramics, Semi Conductors, Water etc) and their products (ICRM 2020 ), Mahatma Gandhi University, Kottayam, Kerala, 2020), 11th-13th December 2020. |
Academic Year 2020 -2021 (Book Chapters)
slno | Description of paper with link |
1 | G. Venkatesha Prasanna, Tirunagari Jayadeep, and Nikhitha Poornabhodha. “Chemical Treatment, Influence of Fiber Content, and Optimization of Hybrid Natural Fiber-Reinforced Composites.” Advances in Materials and Manufacturing Engineering, Springer Proceedings in Materials, Volume 7, Springer, Singapore, Pages 325-335, September 2020. |
2 | Gowdagiri Venkatesha Prasanna, A. Nikhil Nihar, G. Lokesh, and N. Naga Sai. “Fiber Surface Treatment and Quantity, Impact on the Performance of Biocomposites.” Recent Trends in Mechanical Engineering, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 321-331, October 2020. (SCOPUS) |
3 | G. Venkatesha Prasanna. “Surface modification, characterization and optimization of hybrid bio composites.” Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 623-632, October 2020. (SCOPUS) |
4 | Gowdagiri Venkatesha Prasanna “Impact of Fiber Length and Chemical Alteration on the Mechanical Properties of Blended Composites.” In Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 633-643, October 2020. (SCOPUS) |
5 | C. M. Sharanaprabhu, Shashidhar K. Kudari, and Mujebur Rehaman. “Effect of Loading Angle on 3D Stress Intensity Factor and T-stress in a Compact Tension Shear (CTS) Fracture Specimen.” Fatigue, Durability, and Fracture Mechanics, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 525-539, October 2020. (SCOPUS) |
6 | N. Ankitha, and M. R. S. Rupa Sri. “Design and Analysis of Shock Absorber.”Recent Trends in Mechanical Engineering, Springer, Singapore, Pages 433-444, October 2020. (SCOPUS) |
Academic Year 2019 -2020 (International Journals)
slno | Description of paper with link |
1 | B. K. Patle, Nitin gudadhe, Om sahu, Sunil kumar kashyap & M. G. Trivedi. “Energy Efficient Approach for Material Identification and Classification.” International Journal of Mechanical and Production Engineering Research and Development, Volume 9, Special Issue, Pages 65-73, June 2019. (SCOPUS) |
2 | Kandi Kishore Kumar, Nagaveni Thallapalli, Mechiri Sandeep Kumar, and C. S. P. Rao. “Fabrication and parametric optimization of SiO2-BN gelcast ceramic composites using response surface methodology.” Materials Today: Proceedings 18, Pages 2298-2307, November 2019. (SCOPUS) |
3 | G. Venkatesha Prasanna, Neeraj Kumar Jha, and K. Akhil Kumar. “Optimisation & Mechanical Testing Of Hybrid BioComposites.” Materials Today: Proceedings 18, Pages 3849-3855, November 2019. (SCOPUS) |
4 | S. Venugopal Rao, M. Venkata Ramana, and A. C. S. Kumar. “An experimental investigation on Compact Graphite Iron wear behavior at 32° C and 200° C.” Materials Today: Proceedings 19, Pages 778-780, August 2019. (SCOPUS) |
5 | S. Venugopal Rao, M. Venkata Ramana, A.C.S Kumar. “An Experimental Research on Friction and Wear Behaviour of Compact Graphite Iron at Elevated Temperatures.” International Journal of Recent Technology and Engineering, Volume 8, Issue 2S11, Pages 2630-2633, September 2019. (SCOPUS) https://www.ijrte.org/wp-content/uploads/papers/v8i2S11/B13190982S1119.pdf |
6 | Patle B. K., Alok Jha, Anish Pandey, N. Gudadhe, and S. K. Kashyap. “The Optimized Path For A Mobile Robot Using Fuzzy Decision Function.” Materials Today: Proceedings 18, Pages 3575-3581, November 2019. (SCOPUS) |
7 | P.Srinivas Reddy, P.Ravi Kumar and C.Sai Kiran. “Design, Fabrication and Analysis of Thermo Electric Refrigerator.” International Journal of Current Engineering and Technology, Volume 9, Issue 6, Pages 835-839, November 2019. https://inpressco.com/wp-content/uploads/2019/11/Paper6835-839.pdf |
8 | P.Ravi Kumar, P.Srinivas Reddy. “Experimental Analysis of Liquid Ring Vacuum Pump Cavitation Reduction.” International Journal for Research in Applied Science & Engineering Technology, Volume 7, Issue 11, Pages 723-726, November 2019. |
9 | Sahoo Sarat Kumar, A. Bara, A. K. Sahu, S. S. Mahapatra, D. S. Kiran, G. S. Teja, E. S. Teja, and S. P. Reddy. “Analysis and Optimization of Wire EDM Process of Titanium by Using GRA Methodology.” Materials Science Forum, vol. 969, pp. 678-684. Trans Tech Publications Ltd, August 2019. (SCOPUS) |
10 | Sk. Mohammad Shareef, P. Lavakumar, M. Udaya Kiran, B. Bhanu Rohit. “Helmet Cooling using Peltier Module.” International Research Journal of Engineering and Technology, Volume 7, Issue 1, Pages 14-18, January 2020. |
11 | Sk. Mohammad Shareef, A.L.N. Arun Kumar, T.Venkatesh. “Failure analysis and Rectification of sealing valve in Blast furnace.” International Journal For Research and Development in Technology, Volume 12, Issue 6, Pages 283-288, December 2019. |
12 | Rajesh Kumar, Ch. Shalini. “Numerical Investigation on Stress and CFD Analysis of Aircraft Wings for Better Performance.” International Journal for Research in Applied Science & Engineering Technology, Volume 7, Issue 11, Pages 727-732, November 2019. |
13 | A. Suresh, G. Diwakar. “Optimization of Machining Process Parameters in Turning and Drilling by using De sign of Experiments with Aluminum 6061-O Alloy and Austenitic Stainless Steel.” International Journal of Innovative Technology and Exploring Engineering, Volume 8, Issue 11, Pages 625-633, September 2019. (SCOPUS) |
14 | A. Suresh, G. Diwakar. “Process Parameters Optimization using Kuhn-Tucker Conditions For Plasma Arc Welding Using Austenitic Stainless Steel Alloy-304l Plates.” International Journal of Engineering and Advanced Technology, Volume 8, Issue 6, Pages 4537-4541, August 2019. (SCOPUS) https://www.ijeat.org/wp-content/uploads/papers/v8i6/F8856088619.pdf |
15 | A. Suresh, CH. Murali. “Analysis and Improvement of Testing Parameters for Mild Steel and Stainless Steel using Taguchi and ANOVA Method.” International Journal for Scientific Research & Development, Volume 7, Issue 6, Pages 269-272, August 2019. |
16 | A. Suresh, G. Diwakar. “Optimization Of Process Parameters In Turning Operation of Austenitic Stainless Steel Rod Using Taguchi Method and ANOVA.” International Journal of Mechanical and Production Engineering Research and Development, Volume 9, Issue 3, Pages 379-386, June 2019. (SCOPUS) http://www.tjprc.org/publishpapers/2-67-1555670972-41.IJMPERDJUN201941.pdf |
17 | A. Suresh, K. Mohan Naidu, Vandavasu Pranathi, Mr. E. Moses Raj Kumar. “Influence of Cutting Fluids on Residual Stresses in CNC Turning of Austenitic Stainless Steel Rods.” International Research Journal of Engineering and Technology, Volume 07, Issue 01, Pages 1882-1885, January 2020. |
18 | Yasin Pathan, M. Venkata Ramana, C. Krishna Vamshi, and K. Pradeep. “A study of continuous Henequen/Epoxy composites.” Materials Today: Proceedings, Volume 18, Pages 3798-3811, November 2019. (SCOPUS) |
19 | P. Srinivas Reddy, P. Ravi Kumar, M. Ravi Kumar. “Performance of Air Conditioner System by Using Various Refrigerants.” International Journal of Applied Engineering Research, Volume 15, Number 2, Pages 118-126, February 2020. |
20 | A. Suresh, V. Karthik, K. Lalitha Manjusha, R. Karthik. “Reliability Investigation and Hazard Rate Diagnosis of Shaliwahana MSW 12MW Green Power Plant Components.” International Journal of Research in Engineering, Science and Management, Volume 3, Issue 2, Pages 1-6, February 2020. https://www.ijresm.com/Vol.3_2020/Vol3_Iss2_February20/IJRESM_ |
21 | R. Parameshwaran., G. Naveen Kumar, and V. Vinayaka Ram. “Experimental analysis of hybrid nanocomposite-phase change material embedded cement mortar for thermal energy storage.” Journal of Building Engineering, Volume 30, Pages 1-8, February 2020.(SCIE & SCOPUS) |
22 | Sowjanya Madireddi. “Effect of heat transfer between melt puddle and cooling wheel on amorphous ribbon formation.” Engineering Science and Technology, an International Journal, Volume 23, Issue 5, Pages 1162-1170, March 2020. (SCIE & SCOPUS) |
23 | P. Lava Kumar, S.K. Mohammad Shareef, A.L.N. Arun Kumar, M. Udaya Kiran. “Concentric Tube Heat Exchanger Effectiveness Enhancement.” International Journal of Creative Research Thoughts, Volume 8, Issue 3, Pages 3114-3122, March 2020. |
24 | G. Vanya Sree. “Performance Analysis of Two Stage Reciprocating Air Compressor.” International Research Journal of Engineering and Technology, Volume 7, Issue 3, Pages 380-382, March 2020. |
25 | Sk. Mohammad Shareef, P. Lakshmi Prasanna. “Performance and Emissions characteristics of DI Diesel engine using different blends of Grape seed biodiesel.” International Journal for Modern Trends in Science and Technology, Volume 6, Issue 4, Pages 217-222, April 2020. |
26 | A Suresh, K.Laya, N.Navya, T. Pavan, Bharghavi. “Adoptability Analysis of Tungsten Inert Gas Welding For Austenitic Stainless Steel Pieces.” International Journal for Research and Development in Technology, Volume 13, Issue 4, Pages 117-122, April 2020. |
27 | Sarat Kumar Sahoo, N. Thirupathi, and K. Saraswathamma. “Experimental Investigation and Multi-Objective Optimization of Die sink EDM Process Parameters on Inconel-625 alloy by using Utility Function Approach.” Materials Today: Proceedings, Volume 24, Part 2, Pages 995-1005, May 2020. (SCOPUS) |
28 | Thallapalli Nagaveni, Kishore Kumar Kandi, and Renuka Batta. “Investigation on the micro-structure and mechanical properties of copper based surface composites fabricated by friction stir processing.” Materials Today: Proceedings, Volume 27, Part 2, Pages 1774-1779, April 2020. (SCOPUS) |
29 | B. K. Patle, Anish Pandey, D. R. K. Parhi, and A. Jagadeesh. “A review: On path planning strategies for navigation of mobile robot.” Defence Technology, Volume 15, Issue 4, Pages 582-606, August 2019. (SCIE & SCOPUS) |
30 | B. K. Patle, Chetan K. Hirwani, Subrata Kumar Panda, Pankaj V. Katariya, Hukum Chand Dewangan, and Nitin Sharma. “Nonlinear deflection responses of layered composite structure using uncertain fuzzified elastic properties.” Steel and Composite Structures Volume 35, Issue 6, Pages 753-763, May 2020. (SCIE & SCOPUS) |
Academic Year 2019 -2020 (National Journals)
|
slno |
Description of paper with link |
|
1 |
Neeraj kumar Jha, Bhavya Sri Tadiparthi. “Design and Analysis of the Sleeve Ejection System in Injection Molding Die for Trolley Wheel.” CVR Journal of Science and Technology, Volume 17, Pages 132-137, December, 2019. |
|
2 |
A. Suresh and Manjeet Kharub. “Energy and Exergy analysis of a Power Plant and Adoption of OPCAN Power Box for Improving Productivity.” CVR Journal of Science and Technology, Volume 17, Pages 138-143, December, 2019. |
|
3 |
C. Sai Kiran. “Design and Analysis of Shock Absorber using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 17, Pages 144-149, December, 2019 |
|
4 |
Dr. Gaurav Sharma, Dr. Manjeet Kharub. “Enhanced Range Free Localization in Wireless Sensor Networks.” CVR Journal of Science and Technology, Volume 16, Pages 26-31, June 2019. |
|
5 |
Dr. Manjeet Kharub, Dr. Gaurav Sharma. “Applying Linear Programming in Employee Scheduling Problem during Off-Season: A Case Study.” CVR Journal of Science and Technology, Volume 16, Pages 122-126, June 2019. |
|
6 |
Sarat Kumar Sahoo, Pathalavathi Bhaskar. “Optimization of Electrical Discharge Coating Process by Desirability Function approach.” CVR Journal of Science and Technology, Volume 16, Pages 127-132, June 2019. |
Academic Year 2019 -2020 (International Conferences)
|
slno |
Description of paper with link |
|
1 |
Dr. M. Sowjanya, Effect of River Morphology During Flood Water Flow – a CFD simulation, 24th HYDRO 2019 – INTERNATIONAL CONFERENCE, Osmania University, Hyderabad, 18-19 December 2019. |
|
2 |
Animesh Sinha, Lavanya Velpuri, Study on Mechanical Properties of Hybrid Nano Composite Modified with Polyethylene Glycol, 1st International Conference on Innovative Research in Engineering, Applied Science & Management, IC-IREASM-2019, Sree Dattha Institute of Engineering and Science, Telangana, 15-16 October 2019. |
|
3 |
G. Naveen Kumar, G. Bharath Reddy, T. Akhil Kankal, Preparation and Characterization of Polymer based capsule used for Energy Storage in Buildings, Advances in Polymer Science and Rubber Technology, IIT Kharagpur, 24-27 September 2019. |
|
4 |
Kishore Kumar Kandi, Nagaveni Thallapalli, Mayank Sunder and RahulVuda, Design and Analysis of Cap Forward Armrest Component, International conference on Advanced Lightweight Materials and Structures, ICALMS-2020, CMR Technical Campus, Hyderabad, 6-7 March 2020. |
|
5 |
Sarat Kumar Sahoo, Shubham Kumar, Pankaj Kumar Yadav, Rishav Kumar, Railway Track Power Generation System Using Piezoelectric Material, International Conference on Advances in Renowned Renewable Energy Technologies, ICARRET-2019, Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, 23-24 October 2019. |
Academic Year 2019-2020 (Book Chapters)
|
slno |
Description of paper with link |
|
1 |
M. Sowjanya., Siddharth V., Amaan M., Adithya M. (2020). “Heat Transfer in Food Crop Dryer Using Halogen Lamp.” Learning and Analytics in Intelligent Systems, vol 2. Springer, Cham, Volume 2, Pages 508-516, July 2019. (SCOPUS) |
|
2 |
Rahul S. Mor, Arvind Bhardwaj, Sarbjit Singh, and Manjeet Kharub. “Framework for Measuring the Procurement Performance in the Dairy Supply Chain.” Sustainable Procurement in Supply Chain Operations, Pages 61-80, June 2019. |
|
3 |
Yasin P., Venkataramana M., Kudari S.K. (2020) Physio-Mechanical Properties and Thermal Analysis of Furcreo Foetedo Mediopicta (ffm) Fibers: Its Potential Application as Reinforcement in Making of Composites. International Conference on Emerging Trends in Engineering (ICETE). Learning and Analytics in Intelligent Systems, vol 2, Pages 492-500 Springer, Cham, 22-23 March 2019, University College of Engineering (SCOPUS) |
|
4 |
Akhil Basutkar, Kunal Baruah, and Shashidhar K. Kudari. “Frequency Analysis of Aircraft Wing Using FEM.” Recent Trends in Mechanical Engineering, Lecture Notes in Mechanical Engineering, Springer, Singapore, Pages 527-533, January 2020. (SCOPUS) |
Academic Year 2018 -2019 (International Journals)
|
slno |
Description of paper with link |
|
1 |
S. Ramprasad, M. Venkata Ramana, and M. Manzoor Hussain. “Development and comparison of cotton dust waste–jute and cotton dust waste–glass fiber reinforced epoxy based hybrid composites.” Indian Journal of Engineering & Materials Sciences, Volume 25, Pages 465-472, December 2018. (SCIE & SCOPUS) http://nopr.niscair.res.in/bitstream/123456789/45881/1/IJEMS |
|
2 |
B. K. Patle, D. R. K. Parhi, Anne Jagadeesh, and Sunil Kumar Kashyap. “Application of probability to enhance the performance of fuzzy based mobile robot navigation.” Applied Soft Computing 75, Pages 265-283, February 2019. (SCIE & SCOPUS) |
|
3 |
Manjeet Kharub. “Critical factors of effective implementation of IT-enabled ISO-9000 QMS.” International Journal of Quality & Reliability Management, Volume 36, Issue 9, Pages 1600-1619, January 2019. (ESCI & SCOPUS) |
|
4 |
Manjeet Kharub, Shah Limon, and Rajiv Kumar Sharma. “The application of quality tools in effective implementation of HACCP: An empirical study of food and pharmaceutical industries.” International Journal of Quality & Reliability Management, Volume 35, Issue 9, Pages 1920-1940, October 2018. (ESCI & SCOPUS) |
|
5 |
Abhishek Pamulapati, Manjeet Kharub. “Brand image and advertising effect of product performance: a case study.” International Journal of Scientific Research and Reviews, Volume 8, Issue 1, April 2019. |
|
6 |
Manjeet Kharub, Rahul S. Mor, and Rajiv Sharma. “The relationship between cost leadership competitive strategy and firm performance: A mediating role of quality management.” Journal of Manufacturing Technology Management, Volume 30, Issue 6, Pages 920-936, August 2018. (SCIE & SCOPUS) |
|
7 |
Sahoo Sarat Kumar, Sunita Singh Naik, and Jaydev Rana. “Experimental Analysis of Wire EDM Process Parameters for Micromachining of High Carbon High Chromium Steel by Using MOORA Technique.” Micro and Nano Machining of Engineering Materials, Pages 137-148, September 2018. |
|
8 |
Bara Alok, Sarat Kumar Sahoo, Sunita Sigh Naik, Anshuman Kumar Sahu, and Siba Sankar Mahapatra. “Multi Response Optimization of Nd: YAG Laser Micro Drilling Characteristics of 304 Stainless Steel using Desirability Function Approach.” Materials Today: Proceedings 5, no. 9, Pages 18975-18982, October 2018. (SCOPUS) |
|
9 |
Sarat Kumar Sahoo, Sunita Singh Naik, Jaydev Rana. “Optimization of WEDM Process Parameters during Machining of HCHCr Steel using TOPSIS Method.” International Journal of Process Management and Benchmarking, Volume 9, Issue 2, Pages 216-231, April 2019. (SCOPUS) |
|
10 |
Neeraj kumar Jha, Venkatesh Prasanna. Chemical treatment and analysis of mechanical properties of hybrid biocomposites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Special Issue, Pages 189-193, June 2018. (SCOPUS) |
|
11 |
N. Ankitha, M. R. S. Rupa Sri and G. Vanya Sree. “Study of Filler Wires Effect on Weld Characteristics of Aluminium Alloy (6351) during Gas Tungsten Arc Welding (GTAW).” Journal of Emerging Technologies and Innovative Research, Volume 5, Issue 8, Pages 76-80, August 2018. |
|
12 |
A. Suresh, G. Diwakar. “Optimization of Process Parameters for Machining of Aluminum 6061-O Alloy on Lathe and Drilling Machine.” International Journal of Mechanical and Production Engineering Research and Development, Volume 8, Issue 5, Pages 85-90, August 2018. (SCOPUS) http://www.tjprc.org/publishpapers/2-67-1535173685-11.IJMPERDOCT201811.pdf |
|
13 |
A. Suresh, A. Akshay kumar, V. Vinay, S. Sai kumar, J. S .Soni, Ch. Murali. “Analysis of Plasma ARC Cutting for Mild Steel and Stainless Steel Plates.” International Journal of Engineering Computational Research and Technology, Volume 3, Issue 1, Pages 31-38, June 2018. http://ijecrt.org/wp-content/uploads/2018/07/8.-IJECRT-3.1.8.pdf |
|
14 |
A. Suresh, G. Kranthi, K. Raju Yadav, M. Prasad, J. S. Soni, Ch. Murali. “Adoptability Analysis of Water Plasma ARC Welding For Mild Steel Pieces.” International Journal of Engineering Computational Research and Technology, Volume 3, Issue 1, Pages 39-44, June 2018. http://ijecrt.org/wp-content/uploads/2018/08/9.-IJECRT-3.1.9.pdf |
|
15 |
Abilash Desai, C. M. Sharanaprabhu, and S. K. Kudari. “Experimental investigation on the effects of fiber orientation on translaminar fracture toughness for glass-epoxy composite under mixed Mode I/II load.” AIP Conference Proceedings, Volume 2057, Issue 1, Page 020010, January 2019. (SCOPUS) |
|
16 |
Shashidhar K Kudari, and C. M. Sharanaprabhu. “The Effect of Anodizing Process Parameters on the Fatigue Life of 2024-T-351-Aluminium Alloy.” Fatigue of Aircraft Structures, Issue 9, Pages 109-115, August 2018. (SCOPUS) |
|
17 |
Anish Pandey, Abhishek Kumar Kashyap, Dayal R. Parhi, and B. K. Patle. “Autonomous mobile robot navigation between static and dynamic obstacles using multiple ANFIS architecture.” World Journal of Engineering, Volume 16, Issue 2, Pages 275-286, April 2019. (ESCI & SCOPUS) |
Academic Year 2018-2019 (National Journals)
|
slno |
Description of paper with link |
|
1 |
Neeraj Kumar Jha and Raghu Prem B. “Design and Analysis of Welding Fixture for Elementary Weld Joints.” CVR Journal of Science and Technology, Volume 15, Pages 90-95, December 2018. |
|
2 |
B. Sravya Reddy, N. Ankitha, Abhinay Sai Kothakonda. “The Performance of Solar Powered Agriculture Sprayer: Design & Analyze.” CVR Journal of Science and Technology, Volume 15, Pages 96-100, December 2018. |
|
3 |
C. Sai Kiran and J. Sruthi. “Design and Structural Analysis of Scissor Jack using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 15, Pages 101-105, December 2018. |
|
4 |
Pathan Yasin, Animalla Ramesh, M.V Ramana and V.Rahul.“The Effect of Ball Diameter on Performance of Wet Scrubber with PVC Balls-Mesh PackingMaterial.” CVR Journal of Science and Technology, Volume 14, Pages 86-90, June 2018. |
|
5 |
G. Bharath Reddy and G. Naveen Kumar. “Optimization of Cutting Parameters for Various Work-Tool Combinations in Turning Operation: An Experimental Investigation”CVR Journal of Science and Technology, Volume 14, Pages 79-85, June 2018. |
|
6 |
C. Sai Kiran and J. Sruthi. “Design and Finite Element Analysis of Domestic LPG Cylinder using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 14, Pages 97-101, June 2018. |
|
7 |
Manjeet Kharub, Garuav Sharma, Sarat Kumar Sahoo. “Investigating the Cause of Poor Efficiency inThermal Power Plant – A Six-Sigma based Case Study” CVR Journal of Science and Technology, Volume 14, Pages 75-78, June 2018. |
|
8 |
Neeraj Kumar Jha and P. V. Ramana “Design Methodology and Analysis of Double Cavity Metal-Plastic-Insert Injection Molding Die for Push Board Pin.” CVR Journal of Science and Technology, Volume 14, Pages 91-96, June 2018. |
|
9 |
Gaurav Sharma, and Manjeet Kharub. “Analysis of Variation in Relative Mobility with Traffic Load in Wireless Mobile Network.” CVR Journal of Science and Technology Volume 15, Pages 56-61, December 2018. |
|
10 |
G Haribabu, K Satyanarayana, M Ratna Deepika. “Machinability Studies on Al2014-Sic-Gr Hybrid Composite.” Journal of Innovation in Mechanical Engineering, Volume 1, Issue 2, Pages 5-10, December 2018. https://www.indianjournals.com/ijor.aspx?target=ijor:ijme1&volume=1&issue=2&article=002 |
Academic Year 2018-2019 (International Conferences)
|
slno |
Description of paper with link |
|
1 |
M. Sowjanya, Heat Transfer in the Cooling Wheel During Planar Flow Melt Spinning Process, Fifth International Conference on Computational Methods for Thermal Problems, THERMACOMP2018, Indian Institute of Science, Bangalore, 9-11 July 2018. (SCOPUS) |
|
2 |
B. K. Patle, Brijesh Patel, Anish Pandey, Om Sahu, D. R. K. Parhi, Analysis of Firefly-Fuzzy Hybrid Controller for Wheeled Mobile Robot, Third International Conference on Computing and Communication Technologies, SAIRAM Engineering College, Chennai, 21-22 February 2019. |
|
3 |
B. K. Patle, Brijesh Patel, Alok Jha, Rule-Based Fuzzy Decision Path Planning Approach for Mobile Robot, Fourth International Conference on Computing Communication Control and Automation, ICCUBEA-2018, Pimpri Chinnchwad College of Engineering, Pune, 16-18 August 2018. |
|
4 |
N. Thirupathi, Sarat Kumar Sahoo, Process Parameters Optimization of Die Sink EDM for Machining Of Inconel-625 Alloy with Brass Electrode by Using MOORA Method, International Conference on Innovative Product Design and Intelligent Manufacturing System, NIT, Rourkela, from 17-18 May, 2019 |
Academic Year 2018-2019 (Book Chapters)
|
slno |
Description with link |
|
1 |
Sowjanya Madireddi, Chapter 15: Initial Flow Analysis in Crucible – Nozzle During Planar Flow Melt Spinning Process, Book: Processing and Characterization of Multicomponent Polymer Systems, Publisher: AAP Press – CRC Press, April 2019. (SCOPUS) |
|
2 |
M. Sowjanya, Chapter 24: Recycling/Purification of Atmospheric Air – CFD Analysis of Flow Through Filters, Book: Re-Use and Recycling of Materials Solid Waste Management and Water Treatment, Publisher: River Publishers Series in chemical, Environmental, and Energy Engineering, April 2019. (SCOPUS) |
Academic Year 2017-2018 (International Journals)
|
slno |
Description of paper with link |
|
1 |
M. Venkata Ramana, and S. Ramprasad. “Experimental Investigation on Jute/Carbon Fibre reinforced Epoxy based Hybrid Composites.” Materials Today: Proceedings, Volume 4, Issue 8, Pages 8654-8664, October 2017. (SCOPUS) |
|
2 |
Uma Maheshwera Reddy Paturi, Harish Devarasetti, David Abimbola Fadare, and Suresh Kumar Reddy Narala. “Application of Artificial Neural Network and Response Surface Methodology in Modeling of Surface Roughness in WS2 Solid Lubricant Assisted MQL Turning of Inconel 718.” In IOP Conference Series: Materials Science and Engineering, Volume 346, Page 012085, November 2017. (SCOPUS) https://iopscience.iop.org/article/10.1088/1757-899X/346/1/012085/pdf |
|
3 |
Uma Maheshwera Reddy Paturi, Harish Devarasetti, and Suresh Kumar Reddy Narala. “Application of Regression And Artificial Neural Network Analysis In Modelling Of Surface Roughness In Hard Turning Of AISI 52100 Steel.” Materials Today: Proceedings, Volume 5, Issue 2, Part 1, Pages 4766-4777, March 2018. (SCOPUS) |
|
4 |
Uma Maheshwera Reddy Paturi, and Suresh Kumar Reddy Narala. “Electrostatic Solid Lubricant Coatings: Optimization of Process Parameters and Performance in Tribological Tests.” Solid State Phenomena, Volume 266, Issue 8, Pages 64-68, October 2017. (SCOPUS) |
|
5 |
Kishore Kumar Kandi, Anand Pupala, and C. S. P. Rao. “Modeling and optimization of process parameters of SiO2-Si3N4 gelcast ceramic composites using RSM.” Materials Today: Proceedings, Volume 4, Issue 8, Pages 7981-7990, October 2017. (SCOPUS) |
|
6 |
Gurabvaiah Punugupati, Kishore Kumar Kandi, P. S. C. Bose, and C. S. P. Rao. “Modeling of Gelcast Ceramics using GP and Multi Objective Optimization using NSGA-II.” Materials Today: Proceedings, Volume 4, Issue 8, Pages 8576-8586, October 2017. (SCOPUS) |
|
7 |
Nikhil M. Thoppil, Kishore Kumar Kandi, N. Selvaraj, and C. S. P. Rao. “An evolutionary approach for modeling and optimization of gelcasting of ceramics.” Materials Today: Proceedings, Volume 4, Issue 8, Pages 8296-8306, October 2017. (SCOPUS) |
|
8 |
T.G. Arul, Manimaran, Ranjith, S. Gopal. “SMED Implementation in a press shop.” IOSR Journal of Mechanical and Civil Engineering, Special Issue, Volume 3, Pages 36-41, September 2017. https://www.iosrjournals.org/iosr-jmce/papers/Conf-17026-2017/Volume-3/7.%2036-41.pdf |
|
9 |
B. K. Patle, D. R. K. Parhi, Anne Jagadeesh, and Sunil Kumar Kashyap. “Matrix-Binary Codes based Genetic Algorithm for path planning of mobile robot.” Computers & Electrical Engineering, Volume 67, Pages 708-728, December 2017. (SCIE & SCOPUS) |
|
10 |
Kulmani Mehar, Subrata Kumar Panda, and Bhumesh K. Patle. “Stress, deflection, and frequency analysis of CNT reinforced graded sandwich plate under uniform and linear thermal environment: A finite element approach.” Polymer Composites, Volume39, Issue10 Pages 3792-3809, May 2017. (SCIE & SCOPUS) |
|
11 |
Kulmani Mehar, Subrata Kumar Panda, and Bhumesh Kumar Patle. “Thermoelastic Vibration and Flexural Behavior of FG-CNT Reinforced Composite Curved Panel.” International Journal of Applied Mechanics, Volume 9, Issue 4, Page 1750046, June 2017. (SCIE & SCOPUS) |
|
12 |
C. K. Hirwani, T. R. Mahapatra, S. K. Panda, S. S. Sahoo, V. K. Singh, and B. K. Patle. “Nonlinear free vibration analysis of laminated carbon/epoxy curved panels.” Defence Science Journal, Volume 67, Issue 2, Pages 207-218, March 2017. (SCIE & SCOPUS) https://publications.drdo.gov.in/ojs/index.php/dsj/article/view/10072/5808 |
|
13 |
B. K. Patle, Dayal Parhi, A. Jagadeesh, and O. P. Sahu. “Real Time Navigation Approach for Mobile Robot.” JCP, Volume 12, Number 2, Pages 135-142, March 2017. |
|
14 |
B. K. Patle, Dayal R. Parhi, A. Jagadeesh, and Sunil Kumar Kashyap. “On firefly algorithm: optimization and application in mobile robot navigation.” World Journal of Engineering, Volume 14, Issue 1, Pages 65-76, February 2017. (ESCI & SCOPUS) |
|
15 |
Rakesh Kumar Gunda, and Suresh Kumar Reddy Narala. “Evaluation of friction and wear characteristics of electrostatic solid lubricant at different sliding conditions.” Surface and Coatings Technology, Volume 332, Pages 341-350, December 2017. (SCIE & SCOPUS) |
|
16 |
Manjeet Kharub, and Rajiv Sharma. “An integrated structural model of QMPs, QMS and firm’s performance for competitive positioning in MSMEs.” Total Quality Management & Business Excellence, Volume 31, Issue3-4, Pages 312-341, January 2018. (SSCI & SCOPUS) |
|
17 |
Manjeet Kharub, B. K. Patle and Gaurav Sharma, “The Relationship between Differentiation Strategy and Firm Performance: a Mediating Role of Quality Management.” IOSR: Journal of Mechanical and Civil Engineering, Special Issue, Volume 3, Pages 66-71, September 2017. https://www.iosrjournals.org/iosr-jmce/papers/Conf-17026-2017/Volume-3/13.%2066-71.pdf |
|
18 |
Manjeet Kharub, and Rajiv Kumar Sharma. “Quantifying the relationship between latent variables after successful implementation of QM practices in MSMEs.” International Journal of Quality & Reliability Management, Volume 35, Issue 4, Pages 875-896, April 2018. (ESCI & SCOPUS) |
|
19 |
Manjeet Kharub, and Rajiv Sharma. “Comparative analyses of competitive advantage using Porter diamond model (the case of MSMEs in Himachal Pradesh).” Competitiveness Review: An International Business Journal, Volume 27, Issue 2, Pages 139-174, March 2017. (ESCI & SCOPUS) |
|
20 |
Manjeet Kharub, and Rajiv Kumar Sharma. “Framework to assess competitive positioning in manufacturing industries.” International Journal of Business Excellence, Volume 12, ssue 2, Pages 139-174, April 2017. (SCOPUS) |
|
21 |
Manjeet Kharub, Bharti, Gaurav Sharma, Jagdeep Singh.”Status of use of Internet and Soft Technology in Small Business.” International Journal of Scientific & Engineering Research, Volume 8, Issue 12, Pages 293-296, December 2017. |
|
22 |
Gaurav Sharma, Manjeet Kharub. “Particle Swarm Based Node Localization in Wireless Sensor Networks”, International Journal of Scientific & Engineering Research, Volume 8, Issue 12, Pages 100-105, December 2017. |
|
23 |
Gaurav Sharma, Manjeet Kharub. “Technical Barriers and Solutions Of GST: A Descriptive Study after First Quarter of Its Implementation.” International Journal of Modern Trends in Engineering and Research, Volume 05, Issue 01, Pages 59-69, January 2018. |
|
24 |
P. V. Ramana, and C. Balaram. “Effect of EGR on CI Engine Emissions and Cooling Rate using diesel and ethanol blends.” International Journal of Advanced Research in Engineering and Applied Sciences, Volume 6, Issue 6, Pages 1-13, June 2017. |
|
25 |
S. Rahamathullah, P.V. Ramana, Neeraj Kumar Jha. “The Effect of Bio Diesel Blends on the Performance of Four Stroke CI Eingine.” International Journal of Creative Research Thoughts, Volume 6, Issue 2, Pages 1253-1259, June 2018. |
|
26 |
G.Vanya Sree, P.V.Ramana.“Experimental analysis on the thermosyphon heatpipe to find heat transfer coefficient.” International Research Journal of Engineering and Technology, Volume 4, Issue 8, Pages 129-136, August 2017. |
|
27 |
Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Sriker Kakustam. “Investigations on the effects of different constitutive models in finite element simulation of machining.” Materials Today: Proceedings, Volume 5, Issue 11, Part 3, PP 25295-25302, December 2018. (SCOPUS) |
|
28 |
E. Ashoka, C. M. Sharanaprabhu, G. Kodancha Krishnaraja, and S. K. Kudari. “Experimental processing and the effects of cenosphere on some mechanical properties of Al6061-SiC composites.” In AIP Conference Proceedings, vol. 1943, no. 1, p. 020103, April 2018. (SCOPUS) |
|
29 |
Sowjanya M.“Influence of angle of inclination of the crucible on puddle formation and ribbon thickness during planar flow melt spinning process.” International Journal of Computational Physics Series 1, Volume 1, Pages 279-285, April 2018.
|
|
30 |
Gurabvaiah Punugupati, Kishore Kumar Kandi, P. S. C. Bose, and C. S. P. Rao. “Modeling and optimization of wear characteristics of gelcast fused silica ceramic composites using RSM.” Materials Today: Proceedings 5, no. 2, Pages 6946-6953, April 2018. (SCOPUS) |
|
31 |
B. K. Patle, Chetan K. Hirwani, Ravi P. Singh, and Subrata K. Panda. “Eigenfrequency and deflection analysis of layered structure using uncertain elastic properties–a fuzzy finite element approach.” International Journal of Approximate Reasoning, Volume 98, Pages 163-176, May 2018. (SCIE & SCOPUS) |
|
32 |
B. K. Patle, Anish Pandey, A. Jagadeesh, and Dayal R. Parhi. “Path planning in uncertain environment by using firefly algorithm.” Defence technology, Volume 14, Issue 6, Pages 691-701, June 2018. (SCIE & SCOPUS) |
|
33 |
B. K. Patle, A. Anurag Reddy, A. Avinash, K. Abhishek.“Automatic Material Identification Technique using Digital Image Processing.” International Journal of Engineering Science Invention Research & Development, Volume 4, Issue 10, Pages 334-340, April 2018. |
|
34 |
Chetan K. Hirwani, Subrata K. Panda, and B. K. Patle. “Theoretical and experimental validation of nonlinear deflection and stress responses of an internally debonded layer structure using different higher-order theories.” Acta Mechanica, Volume 229, Issue 8, Pages 3453-3473, May 2018. (SCIE & SCOPUS) |
|
35 |
Bharti Sharma, Manmohan Singh, and Manjeet Kharub. “GST in India: Concept and SWOT Analysis.” IAETSD Journal For Advanced Research In Applied Sciences, Volume 5, Issue 2, Pages 489-497, February 2018. |
|
36 |
Animesh Sinha, Nazrul Islam Khan, Subhankar Das, Jiawei Zhang, and Sudipta Halder. “Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin.” High Performance Polymers, Volume 30, Issue 10, Pages 1159-1168, December 2017. (SCIE & SCOPUS) |
|
37 |
K.Sriker, T.Vijaybabu and A.Seshappa, B.Venkatesh.” Wear Behavior Of Multilayer Over Mono Layer Of Fe-C-Cr Hardfacing Alloy On Astm A 105 Steel”, International Journal of Mechanical Engineering and Technology, Volume 8, Issue 12, Pages 999-1006, December 2017. (SCOPUS) http://www.iaeme.com/MasterAdmin/Journal_uploads/IJMET/VOLUME_ |
|
38 |
Murugan Thangadurai, Rajesh Kumar, Subhas Chandra Rana, and Dipankar Chatterjee. “Aerodynamic Influence of Added Surfaces on the Performance Characteristics of a Sports Car.” Journal of The Institution of Engineers (India): Series C, Volume 100, Issue 3, Pages 411-421, May 2018. (SCOPUS) |
|
39 |
A. Suresh, and G. Diwakar. “Analysis, Investigation and Testing of Adaptability of Plasma Arc Welding for Mild Steel Plates.” International Journal of Mechanical Engineering and Technology (IJMET), Volume 9, Issue 4, Pages 741-747, April 2018. (SCOPUS) http://www.iaeme.com/MasterAdmin/Journal_uploads/IJMET/VOLUME_ |
|
40 |
A. Suresh, and G. Diwakar. “Reliability Optimization Analysis and Improvement.” International Journal of Creative Research Thoughts, Volume 6, Issue 1, Pages 845-850, January 2018. |
Academic Year 2017-2018 (National Journals)
|
slno |
Description of paper with link |
|
1 |
M. Sowjanya, MD. Firasatalizahed, MD. Abdul Hafeez, MD. Aslam Sohail, MD. Hammad, An experimental investigation to predict the influence of number of Peltier modules and input voltage during non-conventional cooling, CVR Journal of Science and Technology, Volume 12, Pages 43-47, June 2017 |
|
2 |
G. Naveen Kumar and G. Bharath Reddy.“Experimental Analysis on Nano-based Phase Change Material for Cooling Applications in Tropical Buildings” in CVR Journal, Volume 13, Pages 101-106, December 2017 |
|
3 |
Pathan Yasin, M. A Mateen, C. Srikanth, M Venkata Ramana, A study of corrugated GFRP glass fiber resin composite subject to transverse loading, CVR Journal of Science and Technology, Volume 12, Pages 53-57, June 2017. |
|
4 |
Sunil Kumar and Lokeswar Patnaik. “Design and Analysis of Four Stage Progressive Tool for House-wiring Wire Clip.” CVR Journal of Science and Technology, Volume 13, Pages 88-95, December 2017. |
|
5 |
C. Sai Kiran , J. Sruthi, S. Chandrahas Balaji. “Design and Crash Analysis of a Passenger Car using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 13, Pages 96-100, December 2017. |
Academic Year 2017-2018 (International Conferences)
|
slno |
Description of paper with link |
|
1 |
Uma Maheshwera Reddy Paturi, Electrostatic solid lubricant coatings: optimization of process parameters and performance in tribological tests, 8th International conference on material and manufacturing technology, ICMMT 2017, Singapore, 4-6 May 2017. |
|
2 |
Uma Maheshwera Reddy Paturi, Barish Devarasetti, Suresh Kumar Reddy Narala, Application of regression and artificial neural network analysis in modeling of surface roughness in hard turning of AISI 52100 steel, 7th International conference on Material procession and characterization, ICMPC-2017, Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, 17-19 March, 2017. |
|
3 |
Uma Maheshwera Reddy Paturi, Application of Artificial Neutral Network and Regression Analysis in Modeling of Surface Roughness in WS2 Solid Lubricant Assisted MQL Turning of Iconel 718 , International Conference on Recent Advances in Materials and Manufacturing Technologies, IMMT- 2017, BITS Pilani Dubai, 28-29 November 2017. |
|
4 |
B. K. Patle, T.G Arul and Manjeet Kharub, Path planning for robots by cell decomposition, International Conference on Innovative Trends in Engineering, Science & Management, ITESM-2017, School of Engineering and Information Technology, Raipur, 10-11 November 2017. |
|
5 |
Vikky Kumhar, B. K. Patle, Omprakash Thakare, T. G. Arul. Optimization of cutting parameters on turning process by using response surface methodology, International Conference on Innovative Trends in Engineering, Science & Management, ITESM-2017, School of Engineering and Information Technology, Raipur, 10-11 November 2017. |
|
6 |
Omprakash Thakare, B. K. Patle, Vikky Kumhar. Calibration of digital Vernier caliper by using standard master gauge block set, International Conference on Innovative Trends in Engineering, Science & Management, ITESM-2017, School of Engineering and Information Technology, Raipur, 10-11 November 2017. |
|
7 |
Manjeet Kharub, Bharti, Gaurav Sharma and Jagdeep Singh. “Status of Use of Internet and Soft Technology in Small Business.” International Conference on Emerging Developments in Engineering and Technology, Mechanical Engineering Department, Shivalik College of Engineeing, Dehradun, 11-12 November 2017. |
|
8 |
Gourav Sharma, Manjeet Kharub, Bharti, Particle Swarm Based Node Localization in Wireless Sensor Networks, International Conference on Emerging Developments in Engineering and Technology, Mechanical Engineering Department, Shivalik College of Engineeing, Dehradun, 11-12 November 2017. https://www.researchgate.net/publication/323167276_Particle_Swarm_ |
|
9 |
Sriker Kakustam, Suresh Kumar Reddy Narala, Umamaheshwera Reddy Paturi, Investigations into the Effects of Different Constitutive Models in Finite Element Simulation of Machining, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA-2017, Mechanical Engineering Department, Amrita School of Engineering, 17-19 August 2017. |
|
10 |
G. Naveen Kumar, Development of hybrid nano based PCM embedded cement mortar for building cooling applications-an Experimental Investigation”, International Conference on Nanotechnology: Ideas, Innovations and Initiatives-2017, Department of Mechanical & Industrial Engineering and Centre for Nanotechnology, IIT Roorkee, 6-8 December 2017. |
Academic Year 2017-2018 (National Conferences)
|
sl no |
Description of paper with link |
|
1 |
T.G. Arul, Manimaran, Ranjith, SMED Implementation in a press shop, Nation Conference on Innovative Approaches in Mechanical Engineering, Department of Mechanical Engineering, St. Martin College of Engineering, Hyderabad, 22-23 September 2017. |
|
2 |
Manjeet Kharub, B. K. Patle and Gaurav Sharma, The relationship between differentiation strategy and firm performance: a mediating role of quality management, Nation Conference on Innovative Approaches in Mechanical Engineering, Department of Mechanical Engineering, St. Martin College of Engineering, Hyderabad, 22-23 September 2017. |
|
3 |
Sunil, P.V. Ramana, Experimental Investigation of Flow Characteristics Through Circular Tube with Porous Medium, Nation Conference on Innovative Approaches in Mechanical Engineering, Department of Mechanical Engineering, St. Martin College of Engineering, Hyderabad, 22-23 September 2017. |
|
4 |
Abilash Desai, C.M. Sharanaprabhu, Shashidhar K. Kudari, Experimental Investigation on Critical Energy Release Rate for an Asymmetric Four Point Bending, National Conference on Advanced Research in Science, Engineering and Management, P.E.S. Institute of Technology and Management, Shivamogga, 26th May 2018. |
Academic Year 2016-2017 (International Journals)
|
slno |
Description of paper with link |
|
1 |
M. Venkata Ramana, Investigations on natural fibers treated with chemicals. International Journal of Emerging Technology and Advanced Engineering, Volume 6, Issue 7, Pages 282-287, July 2016. |
|
2 |
M. Venkata Ramana. “Parametric Optimization of CO2 Mould Made of Reclaimed Sand for Better Collapsibility.” International Journal of Engineering Research, Volume 5, Issue 2, Pages 86-89, February 2016. |
|
3 |
M. Venkata Ramana. “Process parameter optimization of CO2 gas cured sodium silicate molding process for better compression strength.” International Journal of Latest Trends in Engineering and Technology, Volume 6, Issue 3, Pages 549-555, January 2016 |
|
4 |
M. Venkata Ramana.“Parametric optimization of `carbon-dioxide moulding process for maximum mold hardness.” International Journal of Engineering Research & Technology, Volume 5, Issue 1, Pages 103-107, January 2016. |
|
5 |
S. K. Kudari, and K. G. Kodancha. “3D Stress intensity factor and T-stresses (T11 and T33) formulations for a Compact Tension specimen.” Frattura ed Integrità Strutturale, Volume 11, Issue 39, Pages 216-225, January 2017. (ESCI & SCOPUS) |
|
6 |
Arun Huddhar, Abilash Desai, C. M. Sharanaprabhu, Shashidhar K. Kudari, and PS Shivakumar Gouda. “Studies on effect of pre-crack length variation on Inter-laminar fracture toughness of a Glass Epoxy laminated composite.” In IOP Conference Series: Materials Science and Engineering, Volume 149, Issue 1, Page 012161, July 2016. (SCOPUS) |
|
7 |
Uma Maheshwera Reddy Paturi, Yesu Ratnam Maddu, Ramalinga Reddy Maruri, and Suresh Kumar Reddy Narala. “Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718.” Procedia CIRP, Volume 40, Pages 138-143, February 2016. (SCOPUS) |
|
8 |
M. Sowjanya, and T. Kishen Kumar Reddy. “Flow Dynamics in the Melt Puddle during Planar Flow Melt Spinning Process.” Materials Today: Proceedings, Volume 4, Issue 2, Pages 3728-3735, April 2017. (SCOPUS) |
|
9 |
M. Sowjanya, and T. Kishen Kumar Reddy. “Obtaining Stable Puddle and Thinner Ribbons during Planar Flow Melt Spinning Process.” Materials Today: Proceedings, Volume 4, Issue 2, Pages 890-897, April 2017. (SCOPUS) |
|
10 |
Sowjanya Madireddi, Krishnan Nambudiripad Krishnan, and Ammana Satyanarayana Reddy. “Numerical Analysis of Heat Transfer during Quenching Process.” Journal of The Institution of Engineers (India): Series C, Volume 99, Issue 2, Pages 217-222, June 2016. (SCOPUS) |
|
11 |
Kishore Kumar Kandi, and C. S. P. Rao. “Modeling of Process Parameters of Gelcast Fused Silica Ceramics using Response Surface Methodology.” Materials Today: Proceedings, Volume 4, Issue 2, Pages 1708-1715, April 2017. (SCOPUS) |
|
12 |
Kishore Kumar Kandi, Sumit Kumar Pal, and C. S. P. Rao. “Effect of dispersant on the rheological properties of gelcast fused silica ceramics.” In IOP Conference Series: Materials Science and Engineering, Volume 149, Issue 1, Page 012063, July 2016. (SCOPUS) |
|
13 |
Gurabvaiah Punugupati, Kishore Kumar Kandi, P. S. C. Bose, and C. S. P. Rao. “Process modeling of gelcast Si3N4 ceramics using multi gene genetic programming.” Materials Today: Proceedings, Volume 4, Issue 2, Pages 1900-1909, April 2017. (SCOPUS) |
|
14 |
PunugupatiGurabvaiah, Kishore Kumar Kandi, P. S. C. Bose, and C. S. P. Rao. “Laser assisted machining: a state of art review.” In IOP Conference Series: Materials Science and Engineering, Volume 149, Issue 1, Page 012014, July 2016. (SCOPUS) |
|
15 |
Nagaveni Thallapalli, Kishore Kumar Kandi, and C. S. P. Rao. “Preparation and Characterization of Si3N4-BN Ceramic Composites by Gelcasting.” Material Science Research India, Volume 13, Issue 1, Pages 28-33, February 2016. |
|
16 |
Rakesh Kumar Gunda, and Suresh Kumar Reddy Narala. “Electrostatic high-velocity solid lubricant machining system for performance improvement of turning Ti–6Al–4V alloy.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 233, Issue 1, Pages 118-131, April 2017. (SCIE & SCOPUS) |
|
17 |
Manjeet Kharub, and Rajiv Kumar Sharma. “Investigating the Role of Porter Diamond Determinants for Competitiveness in Msmes.” International Journal for Quality Research, Volume 10, Issue 3, Pages 471-486, August 2016. (ESCI & SCOPUS) |
|
18 |
Manjeet Kharub, and Rajiv Kumar Sharma. “Investigating the role of CSF’s for successful implementation of quality management practices in MSMEs.” International Journal of System Assurance Engineering and Management, Volume 7, Issue 1, Pages 247-273, December 2016. (ESCI & SCOPUS) |
|
19 |
P.V. Ramana. ‘A comprehensive study on sources of energy for future development.” International Journal of Multidisciplinary Research and Modern Education, Volume 2, Issue 2, Pages 290-298, October 2016. |
|
20 |
P.V. Ramana, D. Maheswar, Dr. B. Durgaprasad.“Experimental Investitation on HCCI Engine using exhaust gas recirculation.” International Journal of Scientific Development and Research, Volume 1, Issue 11, Pages 169-181, November 2016. |
|
21 |
P.V. Ramana, D. Maheswar, B. Durgaprasad.“Investigation on combustion Analysis and simulations of HCCI Engine on performance and emissions.” International Journal of Scientific Development and Research, Volume 1, Issue 9, Pages 252-267, September 2016. |
|
22 |
P.V. Ramana, D. Rambabu.“Experimental comparision of single and multistage air compressor efficiencies under the same receiver tank pressure.”Anveshana’s International Journal Research in Engineering and Applied sciences, Volume 1, Issue 6, Pages 28-37, June 2016. |
|
23 |
P.V. Ramana, Investigation on IC engine combustion with the concept of HCCI Technology, International Journals of Engineering & Scientific Research, Volume 4, Issue 7, Pages 42-63, July 2016. |
|
24 |
P.V. Ramana, B. Sudheer premkumar, D. Maheswar.“Recent trends on outcome based Engineering Education.”Anveshana’s International Journal Research in Engineering and Applied sciences, Volume 1, Issue 4, Pages 34-42, April 2016. |
|
25 |
P. V. Ramana, and B. SudheerpremKumar. “Development of a practical model to find out effectiveness of heat exchanger and its comparison with standard values.” International Journal of Innovative Research and Creative Technology, Volume 1, Issue 5, Pages 468-472, March 2016. |
|
26 |
P.V. Ramana, D. Maheswar, V. Rajendra Kumar.“Outcome Quality Measures Applied to Engineering Education.” International Journal of Engineering Sciences & Research Technology, Volume 5, Issue 1, Pages 674-682, January 2016. |
|
27 |
B. Sravya, N. Ankitha.“Design and manufacturing of two cavity auto injection mold of male insulator for solar connector.” International Journal of Engineering Trends and Technology, Volume 41, Issue 4, Pages 205-209 , 2016. |
|
28 |
Shaik GouseAhammad, GajjalaVasavi, Shaik Mohammad Shareef. “Performance and emissions characteristics of direct injection diesel engine fueled with apricot seed biodiesel and diesel.” Global Journal of Engineering Science and Research Management, Volume 4, Issue 2, Pages 61-68, February 2017. http://www.gjesrm.com/Issues%20PDF/Archive-2017/February-2017/7.pdf |
|
29 |
Anshuman Kumar Sahu, Pragyan Paramita Mohanty, and Sarat Kumar Sahoo. “Electro discharge machining of Ti-alloy (Ti6Al4V) and 316L Stainless Steel and Optimization of process parameters by Grey relational analysis (GRA) method.” Advances in 3D Printing & Additive Manufacturing Technologies, Pages 65-78, August 2016. |
|
30 |
Alok Bara, Sarat Kumar Sahoo, and Sunita Singh Naik. “Multi-response Optimization of Nd: YAG Laser for Micro-drilling of 304 Stainless Steel Using Grey Relational Analysis.” Advances in 3D Printing & Additive Manufacturing Technologies, Pages 101-110, August 2016. |
|
31 |
Sravanam Sushma, Dipankar Saha, Dr. K Leo Dev Wins, Formulation of soya oil based cutting fluid and parametric optimization during hard turning of OHNS steel with minimal cutting fluid application, International Journal of Advanced Technology in Engineering and Science, Volume 5, Issue 3, Pages 1047-1060, March 2017. https://www.ijates.com/images/short_pdf/1490856631_S3147.pdf |
|
32 |
Sasidhar Reddy, S. Venkateshwarulu, Shaik Mohammed Shareef. “Performance of diesel engine using nerium oil as alternative fuel.”International Journal of Engineering Science and Computing, Volume 7, Issue 2, Pages 4383-4389, February 2017. |
|
33 |
Shaik. Mohammed Shareef, M. Laxmi Kanth Reddy, G. Prasanthi.“Emission characteristics of direct injection diesel engine with EGR using CFD analysis.” International Journal for Research and Development in Technology, Volume 6, Issue 1, Pages 90-93, August 2016. |
|
34 |
P. Tejasvi, A.Vijaya.“Analysis and experimental validation of asymmetrically loaded clamped circular plate.”Journal of Chemical and Pharmaceutical Sciences, Volume 9, Issue 4, Pages 2606-2609, December 2016. (SCOPUS) |
|
35 |
Lokeswar Patnaik, Sunil Kumar, and S. Deva Prasad. “A Comparative Study of Chain Clamping Fixture with Other Clamping Methods for Gate Valve Body: Cycle Time and Rigidity Study.” MATEC Web of Conferences, Volume 77, Page 01033, October 2016. (SCOPUS) https://www.matec-conferences.org/articles/matecconf/pdf/2016/ |
|
36 |
Gayathri Tadepalli, M. Gayatri Vineela, and TA Janardhan Reddy. “Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions.” Materials Today: Proceedings, Volume 4, Issue 2, Pages 740-745, April 2017. (SCOPUS) |
Academic Year 2016 -2017 (National Journals)
|
slno |
Description of paper with link |
|
1 |
K. Sriker, P. Uma Maheswera Reddy, M. Venkata Ramana. “Investigations of wear characteristics of Fe-Cr- C hardfacing alloy on AISI-304 Steel.”CVR journal of science & technology, Volume 11, Pages 47-50, December 2016. |
|
2 |
Sunil Kumar, L Patnaik, Design and Analysis of Seven Stage Progressive Tool for Automobile Engine Starter Key, CVR Journal of Science & Technology, Volume 12, Pages 48-52, June 2017. |
|
3 |
Lokeswar Patnaik, Sunil Kumar. “Analysis and design of plastic mold for male insulator of solar connector using plastic advisor 7.0.” CVR Journal of Science & Technology, Volume 11, Pages 51 – 56, December 2016. |
Academic Year 2016 -2017 (International Conferences)
slno | Description of paper with link |
1 | Uma Maheshwera Reddy Paturi, Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718, 13th Global Conference on Sustainable Manufacturing, Ho-Chi Minh City, Vietnam, 16-18 September 2015. |
2 | M. Sowjanya, An Analytical & Experimental Investigation of Planar flow Melts Spinning Process to manufacture amorphous ribbons, International Conference on Design and Production Engineering, Berlin, Germany, 25-26 July 2016 https://www.longdom.org/conference-abstracts-files/2168-9873-C1.002_021.pdf |
3 | Thoppil Nikhil M, Kishore Kumar Kandi, N. Selvaraj, and C. S. P. Rao. “MGGP Modeling and Analysis of Gelcasting Preparation of Ceramics.” 6th International & 27th All India Manufacturing Technology, Design and Research Conference, College of Engineering, Pune, 16-18 December 2016. |
4 | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala. “New cooling approach for tool life improvement with minimal quantity solid lubricant machining of Ti-6Al-4V alloy.” 6th International & 27th All India Manufacturing Technology, Design and Research Conference, College of Engineering, Pune, 16-18 December 2016. |
5 | Manjeet Kharub and Rajiv Sharma. “The Relationship between Cost Leadership Strategy and Firm Performance: A Mediating Role of Quality Management.” 4th International Conference on Production and Industrial Engineering, CPIE-2016, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, 19-21 December 2016. |
6 | P.V. Ramana, D. Rambabu.“Experimental comparision of single and multistage air compressor efficiencies under the same receiver tank pressure.” International Conference on Emerging Trends in Engineering Applicatins and Management concepts, ICETEAMC-2016, 13th May 2016. |
7 | G. Mrudula, P. Bhargavi, V.Sucharitha, Dr. A. Krishnaiah, Effect of process parameters on friction stir welded aluminium alloy IS737, International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, ICRAMCE-2017, 1-2 June 2017. |
8 | Pavan Kumar. T, G. Mrudula, Krishnaiah. A, G. Chandra Mohan Reddy, Comparative analysis of temperature distribution during friction stir welding using different tool profiles, International Conference on Advanced Manufacturing and Materials, ICAMM-2017 |
9 | K. Sriker, Wear behavior of multilayer over single layer of Fe-C- Cr hardfacing alloy on ASTM A 105 Steel, International Conference on Advanced Materials and Applications, ICAMA 2016, BMS College Of Engineering, Banglore, 15-17 June 2016. http://www.iaeme.com/MasterAdmin/Journal_uploads/IJMET/VOLUME_ |
10 | K. Sriker, B. Venkatesh, Wear behavior characteristics of multilayer over monolayer of Fe-Cr- V based hardfacing alloy on ASTM A 105 Steel, International Conference on Design and Manufacturing, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, Chennai, December 16-17, 2016. |
11 | L Patnaik, Sunil Kumar, Design and development of a special purpose machine for glass insertion in plastic frame for spill guard glass shelf assembly of commercial refrigerators, IEEE International conference on advances in Mechanical, Industrial, Automation and Management Systems, Motilal Nehru National Institute of Technology, 3-5 February 2017. |
12 | L Patnaik, Sunil Kumar, Switching from three simple tool to single progressive tool for web brake shoe production: A feasible study, International Conference on Frontiers in Engineering, Applied Sciences and Technology, FEAST – 2017, National Institute of Technology Tiruchirappalli, 31 March to 01 April 2017. |
13 | L Patnaik, Sunil Kumar, Analysis and design of multi impression split core, finger cam operated mold for brass insert connector plug, International Conference on Frontiers in Engineering, Applied Sciences and Technology, FEAST – 2017, National Institute of Technology Tiruchirappalli, 31 March to 01 April 2017. |
14 | Dipankar Saha, Sravanam Sushma, Mallikarjun Jalageri, Parametric optimization of TIG welding for M1020 using Taguchi-Grey relation based design method, International Conference on Emerging Trends in Engineering, and Science, Sphoorthy Engineering College, Hyderabad, 17-18 March 2017. |
Academic Year 2015 -2016 (International Journals)
|
slno |
Description of paper with link |
|
1 |
M. Venkata Ramana.“Modelling of process parameters of silicate bonded CO2 mold made of reclaimed CO2 sand using artificial neural networks.” International Journal of Advances in Engineering Research, Volume 10, Issue 2, Pages 77-84, August 2015. https://www.ijaer.com/images/short_pdf/1437543961_M_VenkataRamana_7.pdf |
|
2 |
S. Ramprasad, and M. Venkata Ramana. “Experimental investigations on tensile and flexural properties of cotton dust reinforced unsaturated polyester composites.” International Journal of Material science, Volume 10, Issue 1, Pages 39-46, 2015. https://www.ripublication.com/Volume/ijomsv10n1.htm |
|
3 |
M. Venkata Ramana. “Parametric Optimization of CO2 Mould Made of Reclaimed Sand for Better Collapsibility.” International Journal of Engineering Research, Volume 5, Issue 2, Pages 86-89, February 2016. |
|
4 |
M. Venkata Ramana. “Process parameter optimization of CO2 gas cured sodium silicate molding process for better compression strength.” International Journal of Latest Trends in Engineering and Technology, Volume 6, Issue 3, Pages 549-555, January 2016. https://www.ijltet.org/journal/87.pdf |
|
5 |
M. Venkata Ramana.“Moulding sand reclamation-a brief review.” International Journal of Latest Trends in Engineering and Technology, Volume 5, Issue 1, Pages 133-137, January 2015. |
|
6 |
T. R. Mohan, C. M. Sharanaprabhu, and K. Kudari Shashidhar. “Study on the effects of sic particles on tensile properties for al/sic composites.” International Journal of Science, Technology and Management, Volume 4, Special Issue 1, Pages 1477-1483, March 2015. |
|
7 |
Uma Maheshwera Reddy Paturi, and Suresh Kumar Reddy Narala. “Experimental investigation to study the effect of electrostatic micro-solid lubricant–coated carbide tools on machinability parameters in turning.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, Issue 5, Pages 693-702, May 2015. (SCIE & SCOPUS) |
|
8 |
Uma Maheshwera Reddy Paturi, and Suresh Kumar Reddy Narala. “On a novel solid lubricant technique: A study on the tribological characteristics under dry slide condition.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Volume 229, Issue 12, Pages 1503-1512, Decemeber 2015. (SCIE & SCOPUS) |
|
9 |
Uma Maheshwera Reddy Paturi, and Suresh Kumar Reddy Narala. “Constitutive flow stress formulation for aeronautic aluminum alloy AA7075-T6 at elevated temperature and model validation using finite element simulation.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Volume 230, Issue 6, Pages 994-1004, June 2015. (SCIE & SCOPUS) |
|
10 |
Kandi Kishore Kumar, Nagaveni Thallapalli, and Surya Prakash Rao Chilakalapalli. “Development of Silicon Nitride‐Based Ceramic Radomes—A Review.” International Journal of Applied Ceramic Technology, Volume 12, Issue 5, Pages 909-920, October 2015. (SCIE & SCOPUS) |
|
11 |
Kandi Kishore Kumar, GurabvaiahPunugupati, Sumit Kumar Pal, and Surya Prakash Rao Chilakalapalli. “Effect of Monomers Content and their Ratio on Gelcasting of Fused Silica Ceramics.” Transactions of the Indian Ceramic Society, Volume 75, Issue 3, Pages 185-188, May 2016. (SCIE & SCOPUS) |
|
12 |
D. Srinivasrao, Raj kishora Dash, Investigation on the combustion characteristics of alumina nanoparticles dispersed longer term stable bio-diesel nanofluids, Advanced Material Letters, Volume 7, Issue 3, Pages 221-225, January 2016. (SCOPUS) |
|
13 |
T.G.Arul, G.Vasanthkumar, K.Thambidurai, M.Sakthivel, “An Experimental and Emission Performance Analysis of Single Cylinder Diesel Engine Test with Hydraulic Loading by Using Ethanol” International Journal of Innovative Research in Science, Engineering and Technology, Volume 4, Special Issue 6, Pages 1567-1574, May 2015. http://www.ijirset.com/upload/2015/multicon/mech/1_ME001.pdf |
|
14 |
T.G.Arul, M.AnashNaina Mohamed, K.Kumaravel, P.Chiranjeevi, “An Experimental and Emission Performance Analysis of Single Cylinder S.I. Engine Test with Electrical Loading by Using Alternative Fuels” International Journal of Innovative Research in Science, Engineering and Technology, Volume 4, Special Issue 6, Pages 1575-1580, May 2015. http://www.ijirset.com/upload/2015/multicon/mech/2_ME002.pdf |
|
15 |
T.G.Arul, N.Pramoth, S.Praveenkumar, R.Preamkumar, A.Rameshkumar, “An Experimental and Fabrication of Miniature Steam Power Plant” International Journal of Innovative Research in Science, Engineering and Technology, Volume 4, Special Issue 6, Pages 1581-1587, May 2015. http://www.ijirset.com/upload/2015/multicon/mech/3_ME003.pdf |
|
16 |
T.G.Arul, C.Arumugam, “Implementation of Lean Manufacturing Technique in Indian Manufacturing Industries.” International Journal of Innovative Research in Science, Engineering and Technology, Volume 4, Special Issue 6, Pages 1847-1853, May 2015. http://www.ijirset.com/upload/2015/multicon/mech/40_ME063.pdf |
|
17 |
M.Gokul, T.G.Arul, K.Venkatesh, “OptimizingTool Wear in CNC Milling Machine by using machine vision Technology” – International Journal of Applied Engineering Research, Volume 10, Special Issue 9, Pages 9290-9294, May 2015. (SCOPUS) |
|
18 |
B. K. Patle, D. R. Parhi, A. Jagadeesh, and Sunil Kumar Kashyap. “Probabilistic fuzzy controller based robotics path decision theory.” World Journal of Engineering, Volume 13, Issue 2, Pages 181-192, April 2016. (ESCI & SCOPUS) |
|
19 |
Rakesh Kumar Gunda, and Suresh Kumar Reddy Narala. “Tribological studies to analyze the effect of solid lubricant particle size on friction and wear behaviour of Ti-6Al-4V alloy.” Surface and Coatings Technology, Volume 308, Pages 203-212, June 2016. (SCIE & SCOPUS) |
|
20 |
Rajiv Kumar Sharma, and Manjeet Kharub. “Qualitative and quantitative evaluation of barriers hindering the growth of MSMEs.” International Journal of Business Excellence, Volume 8, Issue 6, Pages 724-747, October 2015. (SCOPUS) |
|
21 |
Rajiv Kumar Sharma, and Manjeet Kharub. “Attaining competitive positioning through SPC–an experimental investigation from SME.” Measuring Business Excellence, Volume 18, Issue 4, Pages 86-103, November 2014. (ESCI & SCOPUS) |
|
22 |
P. V. Ramana. “Experimental study of Bell Coleman cycle using Air as Refrigerant.” International Journal of Research in Engineering and Applied Sciences, Volume 5, Issue 11, Pages 34-45, November 2015. http://euroasiapub.org/wp-content/uploads/2016/09/6EASNov-2816-1.pdf |
|
23 |
P.V. Ramana, B. Sudheer Premkumar.“Experimental study on utilization of exhaust gas of an I.C Engine.” IJRDO-Journal of Mechanical and Civil Engineering, Volume 1, Issue 9, Pages 1-15, September 2015. |
|
24 |
P.V. Ramana, B.Sudheerprem Kumar, D. Maheswar.“A comprehensive study on solar power plant at Educational Institute Level.” International Journal of Scientific Research & Engineering Trends, Volume 1, Issue 4, Page 42-49, July 2015. |
|
25 |
P. V. Ramana, P. Ramanath Reddy, C. Balaram, and A. Sharath Kumar. “Experimental study on CI engine performance using biodiesel blends.” International Research Journal of Engineering and Technology, Volume 2, Issue 3, Pages 1107-1116, June 2015. |
|
26 |
P. V. Ramana, D. Maheswar, and B. Umamaheswar Gowd. “An approach of experimental study on HCCI engine.” International Journal of Advanced Research in Engineering and Applied Sciences, Volume 4, Issue 5, Pages 1-25, May 2015. |
|
27 |
P. V. Ramana, D. Maheswar, and B. Umameheswer Gowd. “Review on research and development of HCCI technology.” International Journal of IT, Engineering and Applied Sciences Research, Volume 4, Issue 5, Pages 5-16, May 2015. |
|
28 |
P.V. Ramana, D. Maheswar, B.Umamaheswar Gowd.“Development of alternative fuels for HCCI Engine Technology.” International Journal of Engineering Development and Research, Volume 3, Issue 2, Pages 108-119, May 2015. |
|
29 |
P.V.Ramana, D.Maheswar, V. Rajendra Kumar.“Outcome Quality Measures Applied to Engineering Education.” International Journal of Engineering Sciences & Research Technology, Volume 5, Issue 1, Pages 674-682, January 2016. |
|
30 |
Gayatri Vineela. M, Gayathri Tadepalli, A. Krishnaiah.“Impact behavior of fiber reinforced composites with a change in fiber orientation.” International Journal of Current Engineering and Technology, Volume 6, Issue 1, Pages 220-225, February 2016. https://inpressco.com/wp-content/uploads/2016/02/Paper40220-225.pdf |
|
31 |
A.L.N.Arun kumar, S.MD.Jameelbasha, Dr. M. Sreenivasulu.“Optimization of power consumption of belt conveyer system by replacing adjustable non contact type internal scraper.” International Journal of Research in Engineering and Technology, Volume 4, Issue 10, Pages 348-356, October 2015. |
|
32 |
B. Venkatesh, K. Sriker, and V. S. V. Prabhakar. “Wear characteristics of hardfacing alloys: state-of-the-art.” Procedia Materials Science, Volume 10, Pages 527-532, 2015. |
|
33 |
Sarat Kumar Sahoo, Foot Step Power Generation, International Journal of Mechanical Engineering and Technology, Volume 7, Issue 2, Pages 187-190, April 2016.(SCOPUS) |
|
34 |
Sarat Kumar Sahoo, Akhya Kumar Bag, Amit Kumar Maharana, Sanjeet Kumar Pandey, Four Wheel Steering System, International Journal of Engineering Sciences & Research Technology, Volume 5, Issue 4, Pages 482-486, April 2016. |
|
35 |
G.R.K.D. Satya Prasad, Sarat Kumar sahoo, Sambit Pritam, Shyama Sundar marandi, Amit Kumar, Kitchen waste based Biomass Plant for Power generation: A case study analysis, International Research Journal of Engineering and Technology, Volume 3, Issue 4, Pages 895-898, April 2016. |
|
36 |
Sucharitha V, V.Thirumal Reddy, Bhargavi Pokala.”Comparison of threaded and unthreaded tool pin profiles in friction stir welding using Ansys.” International Journal of Current Engineering and Technology, Volume 6, Issue 1, Pages 13-18, February 2015. https://inpressco.com/wp-content/uploads/2016/01/Paper313-18.pdf |
|
37 |
P. Ravi Kumar, K. Manikanta.“Design and Manufacturing Air Frame Missile.” International Journal of Mechanical Engineering Research and Technology, Volume 1, Issue 2, Pages 149-163, November 2015. https://ijmert.net/ijmertadmin/upload/IJASVM_5cd25f5b9d196.pdf |
Academic Year 2015 -2016 (National Journals)
|
Sl no. |
Description of paper with link |
|
1 |
M. Venkata Ramana.“Process parameter optimization of CO2 molding process for better permeability.” CVR Journal of Science & Technology, Volume 9, Pages 98-101, December 2015. |
Academic Year 2015 -2016 (International Conference)
|
Sl no. |
Description of paper with link |
|
1 |
Uma Maheshwera Reddy Paturi, Finite element analysis and study of tool wear in machining with coated tools, International Mechanical Engineering Congress and Exposition, IMECE2013, San Diego, California, USA, 15-21 November 2013. |
|
2 |
Sowjanya Madireddi, Initial flow analysis of crucible nozzle during planar flow melt spinning process, International Conference on Polymer Processing and Characterization, 2016 |
|
3 |
Sowjanya Madireddi, K.S Krishna, Numerical analysis to predict effective quench medium for aluminium alloy, International Conference on Technological Innovations in Mechanical Engineering, 2016 |
|
4 |
Om Prakash Sahu, Bunil K. Balabantaray, B. Patle, Bibhuti Bhusan Biswal, Part recognition using vision and ultrasonic sensor for robotic assembly, IEEE Student Conference on Research and Development, Kuala Lumpur, Malaysia, 13-14 December 2015. |
|
5 |
Manjeet Kharub and Rajiv Sharma (2015). “Quality tools and techniques: factors influencing success and failure in manufacturing enterprises” 17th ISME Conference on Advances in Mechanical Engineering, Department of Mechanical Engineering. Indian Institute of Technology Delhi, New Delhi, 3-4 October 2015. |
|
6 |
P.V. Ramana, B.Sudheer Prem Kumar, D.Maheswar.” Effect of EGR on Exhaust emission of CI engine using Bio-diesel blends.” International Conference on Emerging Trends in Science Technology Engineering and Management, 9-10 October 2015. |
|
7 |
P.V. Ramana, Study on concept of combustion with HCCI technology and its challenges, International Conference on Emerging Trends in Engineering Applications and Basic Sciences, AICETEAB-2015, 8th November 2015. |
|
8 |
Tadepalli Gayathri, M. Gayatri Vineela, and TA Janardhan Reddy. “Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions.” International Conference on Materials Manufacturing and Characterization, ICMPC 2016, Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, 12-13 March 2016. |
|
9 |
G. Bharat Reddy, Parametric Analysis on powder mixed electric discharage machining of various steels using Taguchi Method, International Conference on Science, Technology and Management, 2015. |
|
10 |
Sarat Kumar Sahoo, Electro discharge machining of Ti-alloy and 316L stainless steel and optimization of process parameters by Vikor method, International Conference on Advanced Research Applications in Engineering and Technology, Rungta College of Engineering & Technology, Chhattisgarh, 29-30 June 2015. |
|
11 |
Sarat Kumar Sahoo, Alok Bara, Anshuman Kumar Sain, An experimental study of wire EDM on high carbon chromium steel, International Conference on Advanced Research Applications in Engineering and Technology, Rungta College of Engineering & Technology, Chhattisgarh, 29-30 June 2015. |
Academic Year 2015 -2016 (National Conference)
Sl no. | Description of paper with link |
1 | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Tribological studies of solid lubricants on ball-on-disc tribometer, 2nd National Conference on Design and Manufacturing for Product Life Cycle (DPLC) 2016, BITS-Pilani Hyderabad Campus, 19-20 March 2016. |
2 | Syed Adil, Rakesh Kumar G, N Suresh Kumar Reddy, Study of tribological characteristics of tungsten carbide and EN-31 steel combination under different environmental conditions, 2nd National Conference on Design and Manufacturing for Product Life Cycle (DPLC) 2016, BITS-Pilani Hyderabad Campus, 19-20 March 2016. |
3 | Bhasker Reddy Marri, Meghana M, Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Optimization of milling using simulated annealing and artificial neural networks, 2nd National Conference on Design and Manufacturing for Product Life Cycle (DPLC) 2016, BITS-Pilani Hyderabad Campus, 19-20 March 2016. |
4 | P.V. Ramana, D. Maheswar, B. UmamaheswarGowd. “Effect of EGR on CI engine performance using cotton seed oil with diesel fuel.” National Conference on Trends in Mechanical Engineering, JNTUACE, Ananthapuram, 23rd September 2015. |
5 | P. V. Ramana, Recent trends on outcome based Engineering Education, National Conference on Recent Trends in Literature, Journalism, Education, Social Science and Management Practices, NCRLJESM-2015, The National Small Industries Corporation, Hyderabad, 20th December 2015. |
6 | B. Singaravel, D. Rambabu, Some machinability studies on turning of HSLA steel using multi level coated tools, 6th National Conference on Advances in Mechanical Engineering, Vasavi College of Engineering, Hyderabad, 6-7 October 2016. |
7 | Bhargavi Polaka, SucharithaV, Dr. T. A. Janardhan Reddy, Mechanical and Microstrctural Behaviour of Stir welded Aluminium Alloys 7075, 2nd National Conference on Design and Manufacturing for Product Life Cycle (DPLC) 2016, BITS-Pilani Hyderabad Campus, 19-20 March 2016. |
8 | Sriker. K, Uma Maheshwera Reddy Paturi, Performance of MoS2 based cutting fluid in hard turning of AISI 52100 steel, 2nd National Conference on Design and Manufacturing for Product Life Cycle (DPLC) 2016, BITS-Pilani Hyderabad Campus, 19-20 March 2016. |
9 | GajjalaVasavi, B. Durga Prasad, Experimental investigation on 4 stroke single cylinder diesel engine fueled with different blends of apricot seed biodiesel and diesel, National Conference on Trends in Mechanical Engineering, JNTUACE, Ananthapuram, 14th July 2016. |
10 | Alok Bara, Sarat Kumar Sahoo, Sunitha, Multi-response optimization of Nd:YAG laser for micro-drilling of 304stainless steel using Desirablility function approach, National Conference on Advanced Manufacturing and Management Systems for Sustainable Economy, 6-7 May 2015. |
11 | Anshuman Kumar Sahu, Mohaty, Sarat Kumar Sahoo, Optimization of process parameters in electro-discharge machining of Ti-alloy (Ti-6Al-4V ) using GRA and WSN method, National Conference on Advanced Manufacturing and Management Systems for Sustainable Economy, 6-7 May 2015. |
12 | Sarat Kumar Sahoo, Alok Bara, Sunitha, Estimation of optimum machining performance by using Utility method in wire EDM of high carbon chromium steel, National Conference on Advanced Manufacturing and Management Systems for Sustainable Economy, 6-7 May 2015. |
13 | Shaik Mohammed Shareef, G. Prasanthi, CFD Mesh generation for pistron Bowl of Direct Injection Diesel Engine, National Conference on Trends in Mechanical Engineering, JNTUACE, Ananthapuram, 27th August 2016. |
Academic Year 2014 -2015 (International Journals)
Sl no. | Description of paper with link |
1 | M. Venkata Ramana.“Optimization of process parameters of CO2 moulding process for better knockout property.” International Journal of Advanced Technology in Engineering and Science, Volume 2, Issue 12, Pages 597-603, December 2014. https://www.ijates.com/images/short_pdf/1419963429_P597-603.pdf |
2 | M. Venkata Ramana. ” Modelling of the properties of sand mould made of reclaimed sand.” International Journal of Engineering Research and Applications, Volume 4, Issue 12 (Part 6), Pages 245-248, December 2014. https://www.ijera.com/papers/Vol4_issue12/Part%20-%206/AJ041206245248.pdf |
3 | S. Venugopal Rao, M. Venkataramana, A.C.S. Kumar. “Effect of Heat treatment process on Ductile Cast iron mechanical properties-an experimental approach.” International Journal of Advanced Technology in Engineering and Science, Volume 2, Issue 12, Pages 221-226 , December 2014. https://www.ijates.com/images/short_pdf/1419265140_P221-226.pdf |
4 | M.Venkata Ramana, Modelling of CO2 molding process, Global Journal of Advanced Engineering Technologies, 2014, 190-194 |
5 | M. Venkata Ramana, “Experimental determination of optimum reclamation time in dry reclamation process of silicate bonded sands.” International Journal of Engineering Research & Technology, Volume 3, Issue 11, Pages 1127-1130, November 2014. |
6 | S. K. Kudari, and K. G. Kodancha. “A new formulation for estimating maximum stress intensity factor at the mid plane of a SENB specimen: Study based on 3D FEA.” Frattura ed Integrità Strutturale, Volume 8, Issue 29, Pages 419-425, July 2014. (ESCI & SCOPUS) |
7 | Paturi Uma Maheshwera Reddy, Suresh Kumar Reddy Narala, and Rajdeep Singh Pundir. “Constitutive flow stress formulation, model validation and FE cutting simulation for AA7075-T6 aluminum alloy.” Materials Science and Engineering: A, Volume 605, Pages 176-185, April 2014. (SCIE & SCOPUS) |
8 | M. Sowjanya, and T. Kishen Kumar Reddy. “Cooling wheel features and amorphous ribbon formation during planar flow melt spinning process.” Journal of Materials Processing Technology, Volume 214, Issue 9, Pages 1861-1870, April 2014. (SCIE & SCOPUS) |
9 | M. Sowjanya, T. Reddy, B. Srivastha, and B. Majumdar. “Simulation of Initial Ribbon Formation during Planar Flow Melt Spinning Process.” Applied Mechanics and Materials, Volume 446, Pages 352-355, November 2013. (SCOPUS) |
10 | D. Srinivasrao, Raj kishora dash. “Effect of nanomaterials sizes on the dispersion stability of biodiesel based nanofluids.” International Journal of Advanced Materials letters, Volume 6, Issue 3, Pages 247-251, February 2015. (SCOPUS) |
11 | T.G.Arul, M.Gokul, N.Raghu, M.Dinesh, “Performance Analysis of hydrogen Fueled Internal Combustion Engine” IJSRD – International Journal for Scientific Research & Development, Volume 2, Issue 9, Pages 290-293, December 2014. |
12 | T.G.Arul, M Gokul, S.Sasidhran, S.Parthasarathi, “Emission test on s.i engine using alternative fuels and ethanol” IJSRD – International Journal for Scientific Research & Development, Volume 2, Issue 9, Pages 463-470, December 2014. |
13 | T. G. Arul, C. Arumugam, and P. Parthiban. “Evaluation of lean manufacturing systems using MADM and Fuzzy TOPSIS.” In Applied Mechanics and Materials, Volume 592, Pages 2628-2638, July 2014. |
14 | Rakesh Kumar Gunda, Narala Suresh Kumar Reddy, and H. A. Kishawy. “A novel technique to achieve sustainable machining system.” Procedia CIRP, Volume 40, Pages 30-34, February 2016. (SCOPUS) |
15 | Marques A., Suresh Kumar Reddy Narala, A. R. Machado, Rakesh Kumar Gunda, Sravan Kumar Josyula, R. B. Da Silva, and M. B. Da Silva. “Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 231, Issue 7, Pages 1144-1159, July 2015. (SCIE & SCOPUS) |
16 | Tarun Nanda, Himanshu Gupta, Manjeet Kharub, and Navdeep Singh. “Diagnostics for pretesting questionnaires: a comparative analysis.” International Journal of Technology, Policy and Management, Volume 13, Issue 1, Pages 67-79, April 2013. (SCOPUS) https://www.inderscienceonline.com/doi/pdf/10.1504/IJTPM.2013.051008 |
17 | P. V. Ramana, D. Maheswar, and B. Umamaheswar Gowd. “Experimental investigation of EGR at various fuel substitutions on dual fuel CI engine.”International Journal of Engineering Development And Research, Volume 2, Issue 4, Pages 3878-3882, December 2014. |
18 | P. V. Ramana, B. Umamaheswar Gowd, D. Maheswar.“Investigation on outline of Homogeneous charge compression ignition and its scope of development.” International Journal of Engineering Research and Management, Volume 1, Issue 8, Pages 59-66, November 2014. |
19 | G. Naveen Kumar, S. Vamshi Krishna, M. Varun Kumar.“Dynamic analysis on electric pole using GFRP materials.” International Journal of Science Technology and Management, Volume 4, Special Issue 1, Pages 267-278, February 2015. |
20 | G. Naveen Kumar, G. Bharath Reddy, and K. ChandraShekar. “Dynamic Response of NACA 0018 for Car Spoiler using CFRP Material.” International Journal of Current Engineering and Technology, Volume 4, Issue 3, Pages 1231-1235, June 2014. https://inpressco.com/wp-content/uploads/2014/05/Paper61231-1235.pdf |
21 | G. Bharath Reddy, G. Naveen Kumar, and K. Chandrashekar. “Experimental investigation on process performance of powder mixed electric discharge machining of AISI D3 steel and EN-31 steel.” International Journal of Current Engineering and Technology,Volume 4, Issue 3, Pages 1218-1222, June 2014. https://inpressco.com/wp-content/uploads/2014/05/Paper31218-1222.pdf |
22 | Srinivas Reddy P, T.A. Janardhan Reddy, Chandra Sekhar K.“Dynamic response of the flexible links and joints of a robot.” International Journal of Current Engineering and Technology, Volume 4, Issue 5, Pages 3104-3110, October 2014. https://inpressco.com/wp-content/uploads/2014/09/Paper23104-3110.pdf |
23 | S. Naresh Kumar, J. Abdul Shukur, K. Sriker, and A. Lavanya. “Design and structural analysis of skid landing gear.” In International Journal of Current Engineering and Technology, Special Issue 2, Pages 635-642, February 2014. http://inpressco.com/wp-content/uploads/2014/02/Paper121635-642.pdf |
24 | Chandra Sekhar K, Naveen Kumar G, Bharat Reddy G. “Design of blade for a wooden small scale wind turbine for domestic purpose.” International Journal of current Engineering and Technology, Volume 4, Issue 5, Pages 1309-1313, June 2014. https://inpressco.com/wp-content/uploads/2014/05/Paper201309-13131.pdf |
Academic Year 2014 -2015 (International Conferences)
Sl no. | Description of paper with link |
1 | Sowjanya M, Kishen Kumar, Tadisina Reddy, Wavy ribbon formation during planar flow melt spinning process – A 3D CFD analysis, 10th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT 2014, 14-16 July 2014. https://pdfs.semanticscholar.org/85a1/7df416cb1ad1566d0f6f9fece352b3b11298.pdf |
2 | T.A. Janardhan Reddy, and P. Srinivas Reddy. “Outcome based education-some initiatives.” The World congress on Engineering and Technology-CET2014, 26-28 October 2014, Wuhan, China. |
3 | J. Sravan Kumar, G. Rakesh Kumar and N. Suresh Kumar Reddy, “A Study for Selection of Cutting Parameters in Turning Process using Decision Making Method”, ICARIMMIEM-2014, Warangal, India. |
Academic Year 2014 -2015 (National Conferences)
Sl no. | Description of paper with link |
1 | K.Sriker, B.Venkatesh, Md. Abdul Waseem Akram, K. Deepak, Temperature Dependent Wear Behavior Characteristics of Hardfacing Alloys: State-Of- The-Art, APAS Golden Jubilee Science Congress-2014, Center for Cellular and Molecular Biology (CCMB) and Indian Institute of Chemical Technology (IICT), Hyderabad, 13-15 November 2014. |
2 | Abdul Waseem Akram, B. Venkatesh, K. Sriker, Structural and Vibrational Analysis of High Speed Helical Gear by using 3D Finite Element Method, APAS Golden Jubilee Science Congress-2014, Center for Cellular and Molecular Biology (CCMB) and Indian Institute of Chemical Technology (IICT), Hyderabad, 2014, 13-15 November 2014. |