ACADEMIC YEAR 2020 -2021
| Sl no. | Journals |
| 1. |
Mr. Abilash Desai, Mr. C. M. Sharanaprabhu, and Mr. S. K. Kudari,Professor in Mechanical Engineering Department published a paper on Glass/Epoxy Fiber Orientation Effects on Translaminar Fracture Toughness under Mixed Mode (I/II) Load Using FPB Specimen inFratturaedIntegritàStrutturale 14, no. 53: 426-433, June 2020. |
| 2 |
Mr. PathalavathiBhaskar and Mr. Sarat Kumar Sahoo, Assistant Professors in Mechanical Engineering Department published a paper on Optimization of Machining Process by Desirability Function Analysis (DFA): A Review in CVR Journal of Science and Technology, Volume 18, Pages 138-143, June 2020. |
| 3. |
Mr. Sk. Mohammad Shareef, Mr. A.L.N. Arun Kumar, and Mr. T. Venkatesh, Assistant Professors in Mechanical Engineering Department published a paper on CFD Analysis of DI Diesel Engine using Exhaust Gas Recirculationin CVR Journal of Science and Technology, Volume 18, Pages 132-137, June 2020. |
| 4. |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department published a paper on Hazard Rate Diagnosis of Heavy Earth Moving Machinery using 2-parameter Weibull Analysis in CVR Journal of Science and Technology, Volume 18, Pages 124-131, June 2020. |
| 5. |
Mr. P. Lava Kumar, Associate Professor in Mechanical Engineering Department published a paper on Yttrium Chloride as Corrosion Inhibitor for 6061Al- SiC Composites in 1:1 mixture of HNO3 + HClin CVR Journal of Science and Technology, Volume 18, Pages 119-123, June 2020 |
| 6. |
Mr. V. Rajender Kumar and Dr. P. V. Ramana, Associate Professorsin Mechanical Engineering Department published a paper onCFD Analysis of Heat transfer Enhancement in a Horizontal Circular Tube using Rectangular type Insert in Turbulent Region in the International Journal of Scientific Development and Research, Volume 5, Issue 7, Pages 139-149, July 2020. |
ACADEMIC YEAR 2019 -2020
| Sl no. | Journals |
| 1. |
Mr. B. K. Patle, Associate Professor in Mechanical Engineering Department, Mr. Nitin gudadhe, Mr. Om sahu, Mr. Sunil kumarkashyap, and Mr. M. G. Trivedi published a paper on Energy Efficient Approach for Material Identification and Classification in the International Journal of Mechanical and Production Engineering Research and Development, Volume 9, Special Issue, Pages 65-73, June, 2019. |
| 2 |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department and Mr. G. Diwakarpublished a paper on Optimization of Process Parameters in Turning Operation of Austenitic Stainless Steel Rod using Taguchi Method and ANOVA in the International Journal of Mechanical and Production Engineering Research and Development, Volume 9, Issue 3, Pages 379-386, June 2019. |
| 3. |
Dr. Gaurav Sharma,and Dr.ManjeetKharub, Assistant Professor in Mechanical Engineering Department published a paper on Enhanced Range Free Localization in Wireless Sensor Networks in CVR Journal of Science and Technology, Volume 16, Pages 26-31, June 2019. |
| 4. | Dr. ManjeetKharub, Assistant Professor in Mechanical Engineering Department and Dr. Gaurav Sharma published a paper on Applying Linear Programming in Employee Scheduling Problem during Off-Season: A Case Study in CVR Journal of Science and Technology, Volume 16, Pages 122-126, June 2019 |
| 5. |
Mr. Sarat Kumar Sahoo, and Mr. PathalavathiBhaskar, Assistant Professors in Mechanical Engineering Department published a paper on Optimization of Electrical Discharge Coating Process by Desirability Function approach in CVR Journal of Science and Technology, Volume 16, Pages 127-132, June 2019. |
| 6. | Mr. S. Venugopal Rao, Dr. M. VenkataRamana, Professor in Mechanical Engineering Department, and Mr. A. C. S. Kumar published a paper on An experimental investigation on Compact Graphite Iron wear behavior at 32° C and 200° C in Materials Today: Proceedings 19 (August 2019): 778-780, August 2019 |
| 7. |
Mr. SahooSarat Kumar, Assistant Professor in Mechanical Engineering Department, A. Bara, A. K. Sahu, S. S. Mahapatra, D. S. Kiran, G. S. Teja, E. S. Teja, and S. P. Reddy published a paper on Analysis and Optimization of Wire EDM Process of Titanium by Using GRA Methodology in Materials Science Forum, vol. 969, pp. 678-684. Trans Tech Publications Ltd, August 2019. |
| 8. |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department and Mr. G. Diwakar published a paper on Process Parameters Optimization using Kuhn-Tucker Conditions For Plasma Arc Welding Using Austenitic Stainless Steel Alloy-304l Plates in the International Journal of Engineering and Advanced Technology, Volume 8 Issue 6, Pages 4537-4541, August 2019. |
| 9. |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department and Ms. CH. Murali published a paper on Analysis and Improvement of Testing Parameters for Mild Steel and Stainless Steel using Taguchi and ANOVA Method in the International Journal for Scientific Research & Development, Volume 7, Issue 6, Pages 269-272, August 2019. |
| 10. |
Mr. S. Venugopal Rao, Dr. M. VenkataRamana, Professor in Mechanical Engineering Department, and Mr. A.C.S Kumar published a paper on An Experimental Research on Friction and Wear Behavior of Compact Graphite Iron at Elevated Temperatures in the International Journal of Recent Technology and Engineering, Volume 8, Issue 2S11, Pages 2630-2633, September 2019. |
| 11 |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department and Mr. G. Diwakarpublished a paper on Optimization of Machining Process Parameters in Turning and Drilling by using De sign of Experiments with Aluminum 6061-O Alloy and Austenitic Stainless Steel in the International Journal of Innovative Technology and Exploring Engineering, Volume 8, Issue 11, Pages 625-633, September 2019. |
| 12 |
Dr. Kandi Kishore Kumar, Associate Professor in Mechanical Engineering Department, Ms. NagaveniThallapalli, Mr. Mechiri Sandeep Kumar, and Mr. C. S. P. Rao published a paper on Fabrication and parametric optimization of SiO2-BN gelcast ceramic composites using response surface methodology in the Materials Today: Proceedings 18 (November, 2019): 2298-2307, November 2019. |
| 13 |
Dr. G. VenkateshaPrasanna, Professor in Mechanical Engineering Department, Mr. Neeraj Kumar Jha, Associate Professor in Mechanical Engineering Department, and Mr. K. Akhil Kumar published a paper on Optimisation& Mechanical Testing Of Hybrid BioComposites in the Materials Today: Proceedings 18 (November 2019): 3849-3855, November 2019. |
| 14 |
Dr. Patle B. K., Associate Professor in Mechanical Engineering Department, Mr. AlokJha, Mr. Anish Pandey, Mr. N. Gudadhe, and Mr. S. K. Kashyap published a paper on The Optimized Path For A Mobile Robot Using Fuzzy Decision Function in the Materials Today: Proceedings 18 (November 2019): 3575-3581, November 2019. |
| 15 |
Mr. P.Srinivas Reddy, Mr. P.Ravi Kumar and Mr. C.Sai Kiran, Assistant Professors in Mechanical Engineering Department published a paper on Design, Fabrication and Analysis of Thermo Electric Refrigerator in the International Journal of Current Engineering and Technology, Volume 9, Issue 6, Pages 835-839, November 2019. |
| 16 |
Mr. P.Ravi Kumar,and Mr. P.Srinivas Reddy, Assistant Professor in Mechanical Engineering Department published a paper on Experimental Analysis of Liquid Ring Vacuum Pump Cavitation Reduction in the International Journal for Research in Applied Science & Engineering Technology, Volume 7, Issue 11, Pages 723-726, November 2019 |
| 17 |
Mr. Rajesh Kumar, Assistant Professor in Mechanical Engineering Department and Ms. Ch. Shalini published a paper on Numerical Investigation on Stress and CFD Analysis of Aircraft Wings for Better Performance in the International Journal for Research in Applied Science & Engineering Technology, Volume 7, Issue 11, Pages 727-732, November 2019. |
| 18 |
Mr. YasinPathan, Assistant Professor in Mechanical Engineering Department,Dr. M. VenkataRamana, Professor in Mechanical Engineering Department, Mr. C. Krishna Vamshi, and Mr. K. Pradeep published a paper on A study of continuous Henequen/Epoxy composites in the Materials Today: Proceedings 18 (November, 2019): 3798-3811, November 2019 |
| 19 |
Mr. Sk. Mohammad Shareef,Mr. A.L.N. Arun Kumar,and Mr. T.Venkatesh,Assistant Professors in Mechanical Engineering Department published a paper onFailure analysis and Rectification of sealing valve in Blast furnace in the International Journal For Research and Development in Technology, Volume 12, Issue 6, Pages 283-288, December 2019.
|
| 20 |
Mr. NeerajkumarJha, Associate Professor in Mechanical Engineering Department and Ms. Bhavya Sri Tadiparthi published a paper on Design and Analysis of the Sleeve Ejection System in Injection Molding Die for Trolley Wheel in the CVR Journal of Science and Technology, Volume 17, Pages 132-137, December, 2019.
|
| 21 |
Mr. A. Suresh and Dr. ManjeetKharub, Assistant Professors in Mechanical Engineering Department published a paper on Energy and Exergy analysis of a Power Plant and Adoption of OPCAN Power Box for Improving Productivity in CVR Journal of Science and Technology, Volume 17, Pages 138-143, December, 2019. |
| 22 |
Mr. C. Sai Kiran, Assistant Professor in Mechanical Engineering Department published a paper on Design and Analysis of Shock Absorber using ANSYS Workbench inCVR Journal of Science and Technology, Volume 17, Pages 144-149, December, 2019.
|
| 23 |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering DepartmentK. Mohan Naidu, VandavasuPranathi, Mr. E. Moses Raj Kumar, IV year students of Mechanical Engineering Department published a paper onInfluence of Cutting Fluids on Residual Stresses in CNC Turning Of Austenitic Stainless Steel Rods in the International Research Journal of Engineering and Technology, Volume 07, Issue 01, Pages 1882-1885, January 2020 |
| 24 |
Mr. Sk. Mohammad Shareef, Mr. M. Udaya Kiran, Assistant Professors in Mechanical Engineering Department,P.Lavakumar, Associate Professor in Mechanical Engineering Department andB. BhanuRohitpublished a paper on Helmet Cooling using Peltier Module in the International Research Journal of Engineering and Technology, Volume 7, Issue 1, Pages 14-18, January 2020.
|
| 26 |
Mr. A. Suresh, Assistant Professor in Mechanical Engineering Department, V. Karthik, K. LalithaManjusha, and R. Karthik.IV year students of Mechanical Engineering Department published a paper onReliability Investigation and Hazard Rate Diagnosis of Shaliwahana MSW 12MW Green Power Plant Components in the International Journal of Research in Engineering, Science and Management, Volume 3, Issue 2, Pages 1-6, February 2020. |
| 26 |
Mr. Mr. P. Srinivas Reddy, Mr. P. Ravi Kumar, and Mr. M. Ravi Kumar, Assistant Professors in Mechanical Engineering Department published a paper on Performance of Air Conditioner System by Using Various Refrigerants in the International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 15, Number 2, Pages: 119-126, February, 2020. |
| 27 |
Mr. Parameshwaran, R., Mr. G. Naveen Kumar, Associate Professor in Mechanical Engineering Department and Mr. V. Vinayaka Ram published a paper on Experimental analysis of hybrid nanocomposite-phase change material embedded cement mortar for thermal energy storagein the Journal of Building Engineering, Volume 30, Pages 1-8, February 2020. |
| 28 |
Dr. MadireddiSowjanya, Professor of Mechanical Engineering Department published a paper on Effect of heat transfer between melt puddle and cooling wheel on amorphous ribbon formationin Engineering Science and Technology, an International Journal, March 2020. |
| 29 |
Mr. P. Lava Kumar, Associate Professor in Mechanical Engineering Department, Mr. S.K. Mohammad Shareef, Mr. A.L.N. Arun Kumar, and Mr. M. Udaya Kiran, Assistant Professors in Mechanical Engineering Departmentpublished a paper on Concentric Tube Heat Exchanger Effectiveness Enhancement in the International Journal of Creative Research Thoughts, Volume 8, Issue 3, Pages 3114-3122, March 2020. |
| 30 |
Ms. G. Vanya Sree, Assistant Professor in Mechanical Engineering Departmentpublished a paper on Performance Analysis of Two Stage Reciprocating Air Compressor in the International Research Journal of Engineering and Technology, Volume 7, Issue 3, Pages 380-382, March 2020 |
| 31 |
Mr. Sk. Mohammad Shareef, Assistant Professor in Mechanical Engineering Departmentand Ms. P. Lakshmi Prasanna published a paper on Performance and Emissions characteristics of DI Diesel engine using different blends of Grape seed biodiesel in the International Journal for Modern Trends in Science and Technology, Volume 6, Issue 4, Pages 217-222, April 2020. |
| 32 |
Mr. A Suresh,Assistant Professor in Mechanical Engineering Department, K.Laya, N.Navya, T. Pavan, and Bharghavi published a paper onAdoptability Analysis of Tungsten Inert Gas Welding for Austenitic Stainless Steel Piecesin International Journal for Research and Development in Technology, Volume 13, Issue 4, Pages 117-122, April 2020. |
| 33 |
Mr. Sarat Kumar Sahoo, Assistant Professor in Mechanical Engineering Department, N. Thirupathi, and K. Saraswathamma published a paper onExperimental Investigation and Multi-Objective Optimization of Die sink EDM Process Parameters on Inconel-625 alloy by using Utility Function Approach in the Materials Today: Proceedings 24: 995-1005, May 2020. |
ACADEMIC YEAR 2018-2019
| Sl no. | International Journals |
| 1. | N. Ankitha, M. R. S. Rupa Sri and G. Vanya Sree. “Study of Filler Wires Effect on Weld Characteristics of Aluminium Alloy (6351) during Gas Tungsten Arc Welding (GTAW).” JETIR August 2018, Volume 5, Issue 8 |
| 2 | Neeraj kumar Jha, Venkatesh Prasanna. Chemical treatment and analysis of mechanical properties of hybrid biocomposites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), PP 189-193 (June, 2018) |
| 3. | Bara Alok, Sarat Kumar Sahoo, Sunita Sigh Naik, Anshuman Kumar Sahu, and Siba Sankar Mahapatra. “Multi Response Optimization of Nd: YAG Laser Micro Drilling Characteristics of 304 Stainless Steel using Desirability Function Approach.” Materials Today: Proceedings 5, no. 9 (2018): 18975-18982. |
| 4. | Sahoo, Sarat Kumar, Sunita Singh Naik, and Jaydev Rana. “Experimental Analysis of Wire EDM Process Parameters for Micromachining of High Carbon High Chromium Steel by Using MOORA Technique.”Micro and Nano Machining of Engineering Materials, pp. 137-148. Springer, Cham, 2019. |
| 5. | Kharub Manjeet, Rahul S. Mor, and Rajiv Sharma. “The relationship between cost leadership competitive strategy and firm performance: A mediating role of quality management.” Journal of Manufacturing Technology Management (3 October 2018). |
| 6. | Manjeet Kharub, Brand image and advertising effect of product performance: a case study (April, 2019), International Journal of Scientific Research and Reviews |
| 7. | Kharub Manjeet, Shah Limon, and Rajiv Kumar Sharma. “The application of quality tools in effective implementation of HACCP: An empirical study of food and pharmaceutical industries.” International Journal of Quality & Reliability Management 35, no. 9 (2018): 1920-1940. |
| 8. | Kharub Manjeet. “Critical factors of effective implementation of IT-enabled ISO-9000 QMS.” International Journal of Quality & Reliability Management (20 March 2019). |
| 9. | Patle B. K., D. R. K. Parhi, Anne Jagadeesh, and Sunil Kumar Kashyap. “Application of probability to enhance the performance of fuzzy based mobile robot navigation.” Applied Soft Computing 75 (2019): 265-283 |
| 10. | S. Ram Prasad, M. Venkata Ramana. Development and comparison of cotton dust waste – jute and cotton dust waste -glass fiber reinforced epoxy based hybrid composites, INDIAN JOURNAL OF ENGINEERING & MATERIALS SCIENCES |
| Slno. | National Journals |
| 1 | G. Bharath Reddy and G. Naveen Kumar. “Optimization of Cutting Parameters for Various Work-Tool Combinations in Turning Operation: An Experimental Investigation”CVR Journal of Science and Technology, Volume 14, June 2018, P 79-85 |
| 2 | Pathan Yasin, Animalla Ramesh, M.V Ramana and V.Rahul.“The Effect of Ball Diameter on Performance ofWet Scrubber with PVC Balls-Mesh PackingMaterial.” CVR Journal of Science and Technology, Volume 14, June 2018, P 86-90 |
| 3 | C. Sai Kiran and J. Sruthi. “Design and Structural Analysis of Scissor Jack using ANSYS Workbench.” CVR Journal of Science and Technology, Volume 15, December 2018, P 101-105 |
| 4 | B. Sravya Reddy, N. Ankitha, Abhinay Sai Kothakonda. “The Performance of Solar Powered Agriculture Sprayer: Design & Analyze.” CVR Journal of Science and Technology, Volume 15, December 2018, P 96-100 |
| 5 | Neeraj Kumar Jha and Raghu Prem B. “Design and Analysis of Welding Fixture for Elementary Weld Joints.” CVR Journal of Science and Technology, Volume 15, December 2018, P 90-95 |
ACADEMIC YEAR 2017-2018
| SLNO. | Intenational Journals |
| 1 | M. Venkata Ramana, S. Ramprasad, Experimental Investigation on Jute/Carbon Fibre reinforced Epoxy based Hybrid Composites, Materials Today: Proceedings, 4, 2017(Elsevier), 8654-8664, ICAAMM-2016 |
| 2 | Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, electrostatic solid lubricant coatings: optimization of process parameters and performance in tribological tests, Solid State Phenomena, 266, October 2017 64-68 |
| 3 | Uma Maheshwera Reddy Paturi, Harish Devarasetti, Suresh Kumar Reddy Narala, Application of regression and artificial neural network analysis in modelling of surface roughness in hard turning of AISI 52100 steel, Materials Today, Accepted for Publication 2017 |
| 4 | Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Sriker Kakustam, Investigations on the effects of different constitutive models in finite element simulation of machining, Materials Today, Accepted for Publication 2017 |
| 5 | Kishore Kumar Kandi, Anand Pupala, C.S.P. Rao, Modeling and optimization of process parameters of SiO2-Si3N4 gelcast ceramic composites using RSM, Materials Today: Proceedings (Elsevier) ICAAMM-2016, 4 (8), 2017, 7981-7990 |
| 6 | Gurabvaiah Punugupati, Kishore Kumar Kandi, P.S.C. Bose, C.S.P. Rao, Modeling of Gelcast Ceramics using GP and Multi Objective Optimization using NSGA-II, Materials Today: Proceedings(Elsevier) ICAAMM-2016, 4 (8), 2017, 8576–8586 |
| 7 | Nikhil M Thoppil, Kishore Kumar Kandi, N Selvaraj, C S P Rao, An evolutionary approach for modeling and optimization of gelcasting of ceramics, Materials Today: Proceedings(Elsevier) ICAAMM-2016, 4 (8), 2017, 8296–8306 |
| 8 | T. G. Arul, Manimaran, Ranjith, SMED Implementation in a press shop, IOSR Journal of Mechanical and Civil Engineering, 2320-334X, 36-41, 2017 |
| 9 | T. G. Arul, C. Arumugam, P. Parthiban Decision Support System for Evaluation of Leanness in Manufacturing Industries International Journal of Enterprise Network Management, Now Accepted to Publish |
| 10 | Kulmani Mehar, Subrata Kumar Panda, Bhumeshwar K. Patle, Thermoelastic Vibration and Flexural Behavior of FG-CNT Reinforced Composite Curved Panel, International Journal of Applied Mechanics, 9 (4), 2017 |
| 11 | C.K. Hirwani, T.R. Mahapatra, S.K. Panda, S.S. Sahoo, V.K. Singh, Bhumeshwar K. Patle, Nonlinear free vibration analysis of laminated carbon/epoxy curved panels, Defence Science Journal, 67 (2), 2017, 207-218 |
| 12 | Bhumeshwar K. Patle, Dayal Parhi, A. Jagadeesh, O.P. Sahu, Real Time Navigation Approach for Mobile Robot, Journal of computers, 12 (2), 2017, 135-142 |
| 13 | Bhumeshwar K. Patle, On the firefly algorithm: optimization and application in mobile robot navigation, World Journal of Engineering, 14 (1), 2017, 65-76 |
| 14 | Bhumeshwar K. Patle, D. R. Parhi, A. Jagadeesh, Sunil Kumar Kashyap, Probabilistic fuzzy controller based robotics path decision theory, World Journal of Engineering, 13 (2), 2016, 181-192 |
| 15 | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Evaluation of Friction and Wear Characteristics of Electrostatic Solid Lubricant at Different Sliding Conditions, Surface and Coatings Technology (Elsevier). (Accepted for publication) |
| 16 | Manjeet Kharub, B. K. Patle, Gaurav Sharma, The Relationship between Differentiation Strategy and Firm Performance: a Mediating Role of Quality Management, IOSR: Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2017, e-ISSN: 2278-1684, p-ISSN: 2320-334X, PP. 66-71 |
| 17 | Manjeet Kharub, Rajiv Kumar Sharma, Quantifying the relationship between latent variables after successful implementation of QM practices in MSMEs, Emerald: Int. J. of Quality & Reliability Management, Accepted on, 6 June 2017. |
| 18 | Manjeet Kharub, Rajiv Kumar Sharma, Comparative analyses of a competitive advantage using Porter diamond model (the case of MSMEs in Himachal Pradesh), Emerald: Competitiveness Review, 2017, Vol. 27, No. 2, pp. 132-160. |
| 19 | Manjeet Kharub, Rajiv Kumar Sharma, Framework to assess competitive positioning in manufacturing industries, Inderscience: Int. J. of Business Excellence, 2017, Vol. 12, No. 2, pp. 139-174. (Scopus Indexed) |
| 20 | G. Vanyasree, P.V. Ramana, Experimental analysis on the thermosyphon heatpipe to find heat transfer coefficient, International research journal of Engineering and Technology, ISSN: 2395-0056, 4 (7), 2017 |
| 21 | P.V. Ramana, C. Balaram, Effect of EGR on CI engine emissions and cooling rates using diesel and ethanol blends, International Journal of Advanced Research in Engineering and Applied Science, 6 (6), 2017 |
| SLNO. | National Journals |
| 1. | G. Naveen Kumar, G. Bharath Reddy, Experimental analysis on nano-based phase change material for cooling applications in tropical buildings, CVR Journal of Science and Technology (13), December 2017, 101-106(NJ) |
| 3. | Sunil Kumar, Lokeswar Patnaik, Design and analysis of four stage progressive tool for house-wiring wire clip, CVR Journal of Science and Technology (13), December 2017, 88-95(NJ) |
| 6. | C. Sai Kiran, J. Sruthi, S. Chandrahas Balaji, Design and crash analysis of a passenger car using ANSYS workbench, CVR Journal of Science and Technology (13), December 2017, 96-100(NJ) |
| 7. | Pathan Yasin, M A Mateen, C Srikanth, M. Venkata Ramana, A study of corrugated GFRP composite subject to transverse loading, CVR Journal of Science and Technology (12), June 2017, 53-57 (NJ) |
| 8. | M. Sowjanya, Md Firasat Ali Zahed, Ad Abdul Hafeez, Md Aslam Sohail, Md Hammad, An experimental investigation to predict the influence of number of Peltier modules and input voltage during non-conventional cooling, CVR Journal of Science and Technology, 12, 2017, 43 (NJ) |
ACADEMIC YEAR 2016-2017
| SLNO. | International Journals |
| 1. | M. Venkata Ramana, Investigations on natural fibers treated with chemicals. International Journal of Engineering Technology and Advanced Engineering, 6 (7) 2016, 282 |
| 2. | M. Venkata Ramana, Parametric Optimization of CO2 Mould Made of Reclaimed Sand for Better Collapsibility, International Journal of Engineering Research, 5 (2), 2016, 86-89 |
| 3. | M. Venkata Ramana, Process parameter optimization of CO2 gas cured sodium silicate molding process for better compression strength, International journal of Latest trends in Engineering and Technology, 6 (3), 2016, 549-554 |
| 4. | M. Venkata Ramana, Parametric optimization of carbon-dioxide moulding process for maximum mold hardness, International Journal of Engineering Research & Technology, 5 (1), 2016, 103-108 |
| 5. | Shashidhar K. Kudari, 3D Stress intensity factor and T-Stresses (T11 and T33) formulations for a Compact Tensile specimen, Frattura ed Integrità Strutturale, 39 (2017), 216-225 |
| 6. | Arun Huddhar, Abilash Desai, C M Sharanaprabhu, Shashidhar K. Kudari, P S Shivakumar Gouda, Studies on effect of pre-crack length variation on Inter-laminar fracture toughness of a Glass Epoxy laminated composite, IOP Conf. Series: Materials Science and Engineering, 149, 2016, 1-5 |
| 7. | Uma Maheshwera Reddy Paturi, Ratnam M, Ramalinga Reddy M, Suresh Kumar Reddy Narala, Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718, Procedia CIRP, 40, 2016, 138-143 |
| 8. | M. Sowjanya, T. Kishen Kumar Reddy, Flow dynamics in the melt puddle during planar flow melt spinning process, Materials Today Proceedings, 4, 2017, 3728-3735 |
| 9. | M. Sowjanya, T. Kishen Kumar Reddy, Obtaining stable puddle and thinner ribbon during planar flow melt spinning process, Materials Today Proceedings, 4, 2017, 890-897 |
| 10. | M. Sowjanya, K. N. Krishnan, A. S. Reddy, Numerical Analysis of Heat Transfer during Quenching Process, Journal of Institute of Engineers India (Series C), DOI 10.1007/s40032-016-0265-6, 2016 |
| 11. | Kishore Kumar Kandi, C.S.P. Rao, Modeling of Process Parameters of Gelcast Fused Silica Ceramics using Response Surface Methodology, Materials Today: Proceedings(Elsevier) ICMPC-2016, 4 (2), 2017, 1708-1715 |
| 12. | Kishore Kumar Kandi, Sumit Kumar Pal, C S P Rao, Effect of dispersant on the rheological properties of gelcast fused silica ceramics, IOP Conference Series: Materials Science and Engineering, IConAMMA-2016, 149 (1), 012063 |
| 13. | Gurabvaiah Punugupati, Kishore Kumar Kandi, P.S.C. Bose, C.S.P. Rao, Process modeling of gelcast Si3N4 ceramics using multi gene genetic programming, Materials Today: Proceedings, 4 (2) ICMPC-2016, 2017, 1900-1909 |
| 14. | Gurabvaiah Punugupati, Kishore Kumar Kandi, P S C Bose, CSP Rao, Laser assisted machining: a state of art review, IOP Conference Series: Materials Science and Engineering, IConAMMA-2016, 149 (1), 2016, 012014 |
| 15. | Nagaveni Thallapalli, Kishore Kumar Kandi, C.S.P. Rao, Preparation and Characterization of Si3N4-BN Ceramic Composites by Gelcasting, Material Science Research India, 13 (1), 2016, 28-33 |
| 16. | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Electrostatic high velocity solid lubricant machining system for performance improvement of turning Ti-6Al-4V alloy, Journal of Engineering Manufacture |
| 17. | Manjeet Kharub, Rajiv Kumar Sharma, Investigating the role of porter diamond determinants for competitiveness in MSMEs,Int. J. of Quality Research, 2016, Vol. 10, No. 3, pp. 471-486. |
| 18. | Manjeet Kharub, Rajiv Kumar Sharma, Investigating the role of CSF’s for successful implementation of quality management practices in MSMEs, Springer:Int. J. of System Assurance Engineering and Management, 2015, Vol. 7, No. 1, pp. 247-273 |
| 19. | P.V. Ramana, A comprehensive study on sources of energy for future development, International Journal of Multidisciplinary Research and Modern Education, ISSN: 2454-6119, 2 (2) December 2016. 1-9 |
| 20. | P.V. Ramana, Dr. D. Maheswar, Dr. B. Durgaprasad, Experimental Investigation on HCCI Engine using exhaust gas recirculation, International Journal of Science development and Research, ISSN: 2455-2631, 1 (1) November 2016, 169-181 |
| 21. | P.V. Ramana, Dr. D. Maheswar, Dr.B. Durgaprasad, Investigation on combustion Analysis and simulations of HCCI Engine on performance and emissions, International Journal of Science development and Research, ISSN: 2455-2631, 1 (9) September 2016, 252-267 |
| 22. | P.V. Ramana, D. Rambabu, Experimental comparison of single and multistage air compressor efficiencies under the same receiver tank pressure, Anveshana International Journal of research Engineering and Applied science, 2455-6300, 1 (6), June 2016, 28-37 |
| 23. | P.V. Ramana, Investigation on IC engine combustion with the concept of HCCI Technology, International journal of Engineering & Science Research, ISSN: 2347-6532, 4 (7) July 2016, 42-63 |
| 24. | P.V. Ramana, B. Sudheer Premkumar, D. Maheswar, Recent trends on outcome based Engineering Education, Anveshana’s International Journal Research in Engineering and Applied sciences, ISSN 2455-6300, 1 (4) April 2016, 34-42 |
| 25. | P.V. Ramana, Development of a practical model to find out effectiveness of heat exchanger and its comparison with standard values, International journal of Advanced Research in Engineering and Applied Sciences, ISSN:2278-6252, 5 (3), March 2016, 20-29 |
| 26. | P.V. Ramana, D. Maheswar, V. Rajendra Kumar, Outcome Quality Measures Applied to Engineering Education, International journal of engineering sciences & research technology, 5 (1), January 2016, 630 |
| 27. | Gayathri Tadepalli, M. Gayatri Vineela, T. A. Janardhan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings. 4 (2) 2016, 740-745 |
| 28. | P.V. Ramana, D. Rambabu, Experimental comparison of single and multistage air compressor efficiencies under the same receiver tank pressure, Anveshana’s international journal of research in engineering and applied sciences, 1 (6) (2016), 28-37 |
| 29. | B. Sravya, N. Ankitha, Design and manufacturing of two cavity auto injection mold of male insulator for solar connector, International Journal of Engineering Trends and Technology, 2016 |
| 30. | B. Sravya, N. Ankitha, Design and manufacturing of two cavity auto injection mold of male insulator for solar connector, International Journal of Engineering Trends and Technology, 41(4) (2016),205-209 |
| 31. | Lokeswar Patnaik, Sunil Kumar, S Deva Prasad, A comparative study of chain clamping fixture with other clamping methods for gate valve body: cycle time and rigidity study, MATEC Web of Conferences 77, 01033 (2016) |
| 32. | Shaik Gouse Ahammad, Gajjala Vasavi, Shaik Mohammad Shareef, Performance and emissions characteristics of direct injection diesel engine fueled with apricot seed biodiesel and diesel, Global journal of engineering and research management, ISSN: 2349-4506, February 2017 |
| 33. | Anshuman Kumar Sahu, Pragyan Paramita Mohanty, Sarat Kumar Sahoo, Electro discharge machining of Ti-alloy and 316L stainless steel and optimization of process parameters by grey relational analysis method, Advance in 3D printing and additive manufacturing, 2017, 65-78 |
| 34. | A Bara, Sarat Kumar Sahoo, SS Naik, Multi-response optimization of Nd:YAG laser for micro-drilling of 304stainless steel using grey relational analysis, Advance in 3D printing and additive manufacturing technologies, 2017, 101-110 |
| 35. | Sravanam Sushma, Dipankar Saha, Dr. K Leo Dev Wins, Formulation of soya oil based cutting fluid and parametric optimization during hard turning of OHNS steel with minimal cutting fluid application, International Journal of Advanced Technology in Engineering and Science, 5 (3) (2017), 1047-1060 |
| 36. | M.Venkata Ramana, Dr. G. Poshal, Dipankar Saha, Implementation of E-Commerce in tiny and micro organizations, International Journal of Engineering Research, 5 (2) (2016), 374-376 |
| 37. | Sasidhar Reddy, S. Venkateshwarulu, Shaik Mohammed Shareef, Performance of diesel engine using nerium oil as alternative fuel, International journal of engineering science and computing, 7 (2) (2017), 4383-4389. |
| 38. | Shaik Mohammed Shareef, M. Laxmi Kanth Reddy, G. Prasanthi, Emission characteristics of direct injection diesel engine with EGR using CFD analysis, International journal for research and development in technology, 2017 |
| 39. | Shaik Gouse Ahammad, Gajjala Vasavi, Shaik Mohammed Shareef, Performance and emissions characteristics of direct injection diesel engine fueled with apricot seed biodiesel and diesel, Global journal of engineering and research management, ISSN: 2349-4506, 2017 |
| 40. | Tejasvi. P, A. Vijaya, Analysis and experimental validation of asymmetrically loaded clamped circular plate, Journal of Chemical and pharmaceutical science, ISSN:0974-2115, 2017 |
| 41. | Lokeswar Patnaik, Sunil Kumar and S Deva Prasad, A comparative study of chain clamping fixture with other clamping methods for gate valve body: cycle time and rigidity study, MATEC Web of Conferences 77, 01033 (2016) |
| 42. | Gayathri Tadepalli, M. Gayatri Vineela, T.A. Janardhan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings. 4 (2) 2016, 740-745 |
| SLNO. | National Journals |
| 1. | K. Sriker, Uma Maheshwera Reddy Paturi,M. Venkata Ramana, Investigations of wear characteristics of Fe-C- Cr hardfacing alloy on AISI-304 Steel, CVR journal of science & technology, 11, 2016, 47-50(NJ) |
| 2. | Sunil Kumar, L Patnaik, Design and Analysis of Seven Stage Progressive Tool for Automobile Engine Starter Key, CVR Journal of Science & Technology, 12 (1) (2016), 48-52 (NJ) |
| 3. | Sunil Kumar, L Patnaik, Analysis and design of plastic mold for male insulator of solar connector using plastic advisor 7.0, CVR Journal of Science & Technology,11 (1) (2016), 51 – 56 (NJ) |
ACADEMIC YEAR 2018-2019
| SLNO. | International Journals |
| 1. | Gayathri Tadepalli, Gayatri Vineela. M, T. A. Janardan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings 4 2017 (Elsevier), ICMPC, 2016 |
ACADEMIC YEAR 2017-2018
| SLNO. | International Journals |
| 1. | Gayathri Tadepalli, Gayatri Vineela. M, T. A. Janardan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings 4 2017 (Elsevier), ICMPC, 2016 |
| 2. | M. Venkata Ramana, S. Ramprasad, Experimental Investigation on Jute/Carbon Fibre reinforced Epoxy based Hybrid Composites, Materials Today: Proceedings, 4, 2017(Elsevier), 8654-8664, ICAAMM-2016 |
| 3. | Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, electrostatic solid lubricant coatings: optimization of process parameters and performance in tribological tests, Solid State Phenomena, 266, October 2017 64-68 |
| 4. | Uma Maheshwera Reddy Paturi, Harish Devarasetti, Suresh Kumar Reddy Narala, Application of regression and artificial neural network analysis in modelling of surface roughness in hard turning of AISI 52100 steel, Materials Today, Accepted for Publication 2017 |
| 5. | Uma Maheshwera Reddy Paturi, Suresh Kumar Reddy Narala, Sriker Kakustam, Investigations on the effects of different constitutive models in finite element simulation of machining, Materials Today, Accepted for Publication 2017 |
| 6. | Kishore Kumar Kandi, Anand Pupala, C.S.P. Rao, Modeling and optimization of process parameters of SiO2-Si3N4 gelcast ceramic composites using RSM, Materials Today: Proceedings (Elsevier) ICAAMM-2016, 4 (8), 2017, 7981-7990 |
| 7. | Gurabvaiah Punugupati, Kishore Kumar Kandi, P.S.C. Bose, C.S.P. Rao, Modeling of Gelcast Ceramics using GP and Multi Objective Optimization using NSGA-II, Materials Today: Proceedings(Elsevier) ICAAMM-2016, 4 (8), 2017, 8576–8586 |
| 8. | Nikhil M Thoppil, Kishore Kumar Kandi, N Selvaraj, C S P Rao, An evolutionary approach for modeling and optimization of gelcasting of ceramics, Materials Today: Proceedings(Elsevier) ICAAMM-2016, 4 (8), 2017, 8296–8306 |
| 9. | T. G. Arul, Manimaran, Ranjith, SMED Implementation in a press shop, IOSR Journal of Mechanical and Civil Engineering, 2320-334X, 36-41, 2017 |
| 10. | T. G. Arul, C. Arumugam, P. Parthiban Decision Support System for Evaluation of Leanness in Manufacturing Industries International Journal of Enterprise Network Management, Now Accepted to Publish |
| 11. | Kulmani Mehar, Subrata Kumar Panda, Bhumeshwar K. Patle, Thermoelastic Vibration and Flexural Behavior of FG-CNT Reinforced Composite Curved Panel, International Journal of Applied Mechanics, 9 (4), 2017 |
| 12. | C.K. Hirwani, T.R. Mahapatra, S.K. Panda, S.S. Sahoo, V.K. Singh, Bhumeshwar K. Patle, Nonlinear free vibration analysis of laminated carbon/epoxy curved panels, Defence Science Journal, 67 (2), 2017, 207-218 |
| 13. | Bhumeshwar K. Patle, Dayal Parhi, A. Jagadeesh, O.P. Sahu, Real Time Navigation Approach for Mobile Robot, Journal of computers, 12 (2), 2017, 135-142 |
| 14. | Bhumeshwar K. Patle, On the firefly algorithm: optimization and application in mobile robot navigation, World Journal of Engineering, 14 (1), 2017, 65-76 |
| 15. | Bhumeshwar K. Patle, D. R. Parhi, A. Jagadeesh, Sunil Kumar Kashyap, Probabilistic fuzzy controller based robotics path decision theory, World Journal of Engineering, 13 (2), 2016, 181-192 |
| 16. | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Evaluation of Friction and Wear Characteristics of Electrostatic Solid Lubricant at Different Sliding Conditions, Surface and Coatings Technology (Elsevier). (Accepted for publication) |
| 17. | Manjeet Kharub, B. K. Patle, Gaurav Sharma, The Relationship between Differentiation Strategy and Firm Performance: a Mediating Role of Quality Management, IOSR: Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2017, e-ISSN: 2278-1684, p-ISSN: 2320-334X, PP. 66-71 |
| 18. | Manjeet Kharub, Rajiv Kumar Sharma, Quantifying the relationship between latent variables after successful implementation of QM practices in MSMEs, Emerald: Int. J. of Quality & Reliability Management, Accepted on, 6 June 2017. |
| 19. | Manjeet Kharub, Rajiv Kumar Sharma, Comparative analyses of a competitive advantage using Porter diamond model (the case of MSMEs in Himachal Pradesh), Emerald: Competitiveness Review, 2017, Vol. 27, No. 2, pp. 132-160. |
| 20. | Manjeet Kharub, Rajiv Kumar Sharma, Framework to assess competitive positioning in manufacturing industries, Inderscience: Int. J. of Business Excellence, 2017, Vol. 12, No. 2, pp. 139-174. (Scopus Indexed) |
| 21. | G. Vanyasree, P.V. Ramana, Experimental analysis on the thermosyphon heatpipe to find heat transfer coefficient, International research journal of Engineering and Technology, ISSN: 2395-0056, 4 (7), 2017 |
| 22. | P.V. Ramana, C. Balaram, Effect of EGR on CI engine emissions and cooling rates using diesel and ethanol blends, International Journal of Advanced Research in Engineering and Applied Science, 6 (6), 2017 |
| SLNO. | National Journals |
| 1. | G. Naveen Kumar, G. Bharath Reddy, Experimental analysis on nano-based phase change material for cooling applications in tropical buildings, CVR Journal of Science and Technology (13), December 2017, 101-106(NJ) |
| 3. | Sunil Kumar, Lokeswar Patnaik, Design and analysis of four stage progressive tool for house-wiring wire clip, CVR Journal of Science and Technology (13), December 2017, 88-95(NJ) |
| 6. | C. Sai Kiran, J. Sruthi, S. Chandrahas Balaji, Design and crash analysis of a passenger car using ANSYS workbench, CVR Journal of Science and Technology (13), December 2017, 96-100(NJ) |
| 7. | Pathan Yasin, M A Mateen, C Srikanth, M. Venkata Ramana, A study of corrugated GFRP composite subject to transverse loading, CVR Journal of Science and Technology (12), June 2017, 53-57 (NJ) |
| 8. | M. Sowjanya, Md Firasat Ali Zahed, Ad Abdul Hafeez, Md Aslam Sohail, Md Hammad, An experimental investigation to predict the influence of number of Peltier modules and input voltage during non-conventional cooling, CVR Journal of Science and Technology, 12, 2017, 43 (NJ) |
ACADEMIC YEAR 2016-2017
| SLNO. | International Journals |
| 1. | M. Venkata Ramana, Investigations on natural fibers treated with chemicals. International Journal of Engineering Technology and Advanced Engineering, 6 (7) 2016, 282 |
| 2. | M. Venkata Ramana, Parametric Optimization of CO2 Mould Made of Reclaimed Sand for Better Collapsibility, International Journal of Engineering Research, 5 (2), 2016, 86-89 |
| 3. | M. Venkata Ramana, Process parameter optimization of CO2 gas cured sodium silicate molding process for better compression strength, International journal of Latest trends in Engineering and Technology, 6 (3), 2016, 549-554 |
| 4. | M. Venkata Ramana, Parametric optimization of carbon-dioxide moulding process for maximum mold hardness, International Journal of Engineering Research & Technology, 5 (1), 2016, 103-108 |
| 5. | Shashidhar K. Kudari, 3D Stress intensity factor and T-Stresses (T11 and T33) formulations for a Compact Tensile specimen, Frattura ed Integrità Strutturale, 39 (2017), 216-225 |
| 6. | Arun Huddhar, Abilash Desai, C M Sharanaprabhu, Shashidhar K. Kudari, P S Shivakumar Gouda, Studies on effect of pre-crack length variation on Inter-laminar fracture toughness of a Glass Epoxy laminated composite, IOP Conf. Series: Materials Science and Engineering, 149, 2016, 1-5 |
| 7. | Uma Maheshwera Reddy Paturi, Ratnam M, Ramalinga Reddy M, Suresh Kumar Reddy Narala, Measurement and analysis of surface roughness in WS2 solid lubricant assisted minimum quantity lubrication (MQL) turning of Inconel 718, Procedia CIRP, 40, 2016, 138-143 |
| 8. | M. Sowjanya, T. Kishen Kumar Reddy, Flow dynamics in the melt puddle during planar flow melt spinning process, Materials Today Proceedings, 4, 2017, 3728-3735 |
| 9. | M. Sowjanya, T. Kishen Kumar Reddy, Obtaining stable puddle and thinner ribbon during planar flow melt spinning process, Materials Today Proceedings, 4, 2017, 890-897 |
| 10. | M. Sowjanya, K. N. Krishnan, A. S. Reddy, Numerical Analysis of Heat Transfer during Quenching Process, Journal of Institute of Engineers India (Series C), DOI 10.1007/s40032-016-0265-6, 2016 |
| 11. | Kishore Kumar Kandi, C.S.P. Rao, Modeling of Process Parameters of Gelcast Fused Silica Ceramics using Response Surface Methodology, Materials Today: Proceedings(Elsevier) ICMPC-2016, 4 (2), 2017, 1708-1715 |
| 12. | Kishore Kumar Kandi, Sumit Kumar Pal, C S P Rao, Effect of dispersant on the rheological properties of gelcast fused silica ceramics, IOP Conference Series: Materials Science and Engineering, IConAMMA-2016, 149 (1), 012063 |
| 13. | Gurabvaiah Punugupati, Kishore Kumar Kandi, P.S.C. Bose, C.S.P. Rao, Process modeling of gelcast Si3N4 ceramics using multi gene genetic programming, Materials Today: Proceedings, 4 (2) ICMPC-2016, 2017, 1900-1909 |
| 14. | Gurabvaiah Punugupati, Kishore Kumar Kandi, P S C Bose, CSP Rao, Laser assisted machining: a state of art review, IOP Conference Series: Materials Science and Engineering, IConAMMA-2016, 149 (1), 2016, 012014 |
| 15. | Nagaveni Thallapalli, Kishore Kumar Kandi, C.S.P. Rao, Preparation and Characterization of Si3N4-BN Ceramic Composites by Gelcasting, Material Science Research India, 13 (1), 2016, 28-33 |
| 16. | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Electrostatic high velocity solid lubricant machining system for performance improvement of turning Ti-6Al-4V alloy, Journal of Engineering Manufacture |
| 17. | Manjeet Kharub, Rajiv Kumar Sharma, Investigating the role of porter diamond determinants for competitiveness in MSMEs,Int. J. of Quality Research, 2016, Vol. 10, No. 3, pp. 471-486. |
| 18. | Manjeet Kharub, Rajiv Kumar Sharma, Investigating the role of CSF’s for successful implementation of quality management practices in MSMEs, Springer:Int. J. of System Assurance Engineering and Management, 2015, Vol. 7, No. 1, pp. 247-273 |
| 19. | P.V. Ramana, A comprehensive study on sources of energy for future development, International Journal of Multidisciplinary Research and Modern Education, ISSN: 2454-6119, 2 (2) December 2016. 1-9 |
| 20. | P.V. Ramana, Dr. D. Maheswar, Dr. B. Durgaprasad, Experimental Investigation on HCCI Engine using exhaust gas recirculation, International Journal of Science development and Research, ISSN: 2455-2631, 1 (1) November 2016, 169-181 |
| 21. | P.V. Ramana, Dr. D. Maheswar, Dr.B. Durgaprasad, Investigation on combustion Analysis and simulations of HCCI Engine on performance and emissions, International Journal of Science development and Research, ISSN: 2455-2631, 1 (9) September 2016, 252-267 |
| 22. | P.V. Ramana, D. Rambabu, Experimental comparison of single and multistage air compressor efficiencies under the same receiver tank pressure, Anveshana International Journal of research Engineering and Applied science, 2455-6300, 1 (6), June 2016, 28-37 |
| 23. | P.V. Ramana, Investigation on IC engine combustion with the concept of HCCI Technology, International journal of Engineering & Science Research, ISSN: 2347-6532, 4 (7) July 2016, 42-63 |
| 24. | P.V. Ramana, B. Sudheer Premkumar, D. Maheswar, Recent trends on outcome based Engineering Education, Anveshana’s International Journal Research in Engineering and Applied sciences, ISSN 2455-6300, 1 (4) April 2016, 34-42 |
| 25. | P.V. Ramana, Development of a practical model to find out effectiveness of heat exchanger and its comparison with standard values, International journal of Advanced Research in Engineering and Applied Sciences, ISSN:2278-6252, 5 (3), March 2016, 20-29 |
| 26. | P.V. Ramana, D. Maheswar, V. Rajendra Kumar, Outcome Quality Measures Applied to Engineering Education, International journal of engineering sciences & research technology, 5 (1), January 2016, 630 |
| 27. | Gayathri Tadepalli, M. Gayatri Vineela, T. A. Janardhan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings. 4 (2) 2016, 740-745 |
| 28. | P.V. Ramana, D. Rambabu, Experimental comparison of single and multistage air compressor efficiencies under the same receiver tank pressure, Anveshana’s international journal of research in engineering and applied sciences, 1 (6) (2016), 28-37 |
| 29. | B. Sravya, N. Ankitha, Design and manufacturing of two cavity auto injection mold of male insulator for solar connector, International Journal of Engineering Trends and Technology, 2016 |
| 30. | B. Sravya, N. Ankitha, Design and manufacturing of two cavity auto injection mold of male insulator for solar connector, International Journal of Engineering Trends and Technology, 41(4) (2016),205-209 |
| 31. | Lokeswar Patnaik, Sunil Kumar, S Deva Prasad, A comparative study of chain clamping fixture with other clamping methods for gate valve body: cycle time and rigidity study, MATEC Web of Conferences 77, 01033 (2016) |
| 32. | Shaik Gouse Ahammad, Gajjala Vasavi, Shaik Mohammad Shareef, Performance and emissions characteristics of direct injection diesel engine fueled with apricot seed biodiesel and diesel, Global journal of engineering and research management, ISSN: 2349-4506, February 2017 |
| 33. | Anshuman Kumar Sahu, Pragyan Paramita Mohanty, Sarat Kumar Sahoo, Electro discharge machining of Ti-alloy and 316L stainless steel and optimization of process parameters by grey relational analysis method, Advance in 3D printing and additive manufacturing, 2017, 65-78 |
| 34. | A Bara, Sarat Kumar Sahoo, SS Naik, Multi-response optimization of Nd:YAG laser for micro-drilling of 304stainless steel using grey relational analysis, Advance in 3D printing and additive manufacturing technologies, 2017, 101-110 |
| 35. | Sravanam Sushma, Dipankar Saha, Dr. K Leo Dev Wins, Formulation of soya oil based cutting fluid and parametric optimization during hard turning of OHNS steel with minimal cutting fluid application, International Journal of Advanced Technology in Engineering and Science, 5 (3) (2017), 1047-1060 |
| 36. | M.Venkata Ramana, Dr. G. Poshal, Dipankar Saha, Implementation of E-Commerce in tiny and micro organizations, International Journal of Engineering Research, 5 (2) (2016), 374-376 |
| 37. | Sasidhar Reddy, S. Venkateshwarulu, Shaik Mohammed Shareef, Performance of diesel engine using nerium oil as alternative fuel, International journal of engineering science and computing, 7 (2) (2017), 4383-4389. |
| 38. | Shaik Mohammed Shareef, M. Laxmi Kanth Reddy, G. Prasanthi, Emission characteristics of direct injection diesel engine with EGR using CFD analysis, International journal for research and development in technology, 2017 |
| 39. | Shaik Gouse Ahammad, Gajjala Vasavi, Shaik Mohammed Shareef, Performance and emissions characteristics of direct injection diesel engine fueled with apricot seed biodiesel and diesel, Global journal of engineering and research management, ISSN: 2349-4506, 2017 |
| 40. | Tejasvi. P, A. Vijaya, Analysis and experimental validation of asymmetrically loaded clamped circular plate, Journal of Chemical and pharmaceutical science, ISSN:0974-2115, 2017 |
| 41. | Lokeswar Patnaik, Sunil Kumar and S Deva Prasad, A comparative study of chain clamping fixture with other clamping methods for gate valve body: cycle time and rigidity study, MATEC Web of Conferences 77, 01033 (2016) |
| 42. | Gayathri Tadepalli, M. Gayatri Vineela, T.A. Janardhan Reddy, Analysis of stress concentration in isotropic and orthotropic plates with hole under uniformly distributed loading conditions, Materials Today Proceedings. 4 (2) 2016, 740-745 |
| SLNO. | National Journals |
| 1. | K. Sriker, Uma Maheshwera Reddy Paturi,M. Venkata Ramana, Investigations of wear characteristics of Fe-C- Cr hardfacing alloy on AISI-304 Steel, CVR journal of science & technology, 11, 2016, 47-50(NJ) |
| 2. | Sunil Kumar, L Patnaik, Design and Analysis of Seven Stage Progressive Tool for Automobile Engine Starter Key, CVR Journal of Science & Technology, 12 (1) (2016), 48-52 (NJ) |
| 3. | Sunil Kumar, L Patnaik, Analysis and design of plastic mold for male insulator of solar connector using plastic advisor 7.0, CVR Journal of Science & Technology,11 (1) (2016), 51 – 56 (NJ) |