Academic Year 2019-2020
| SLNO. | Participations |
| 1. |
Mr. G. Naveen Kumar, Associate Professor in Mechanical Engineering Department, Mr. G. Bharath Reddy, Assistant Professor in Mechanical Engineering Department and Mr. T. AkhilKankal published and presented a paper on Preparation and Characterization of Polymer based capsule used for Energy Storage in Buildings in International Conference on Advances in Polymer Science and Rubber Technology, September 24-27, 2019, IIT Kharagpur, India. |
| 2. |
Mr. Animesh Sinha, and Ms. LavanyaVelpuri, Assistant Professors in Mechanical Engineering Department published and apresented paper on Study on Mechanical Properties of Hybrid Nano Composite Modified with Polyethylene Glycol in the 1st International Conference on Innovative Research in Engineering, Applied Science & Management (IC-IREASM-2019), 15-16, SreeDattha Institute of Engineering and Science, Telangana, India, October, 2019. |
| 3. |
Mr. Sarat Kumar Sahoo, Assistant Professor in Mechanical Engineering Department Mr. Shubham Kumar, Mr. Pankaj Kumar Yadav, and Mr. Rishav Kumar published and presented a paper on Railway Track Power Generation System Using Piezoelectric Material in the International Conference on Advances in Renowned Renewable Energy Technologies (ICARRET-2019), 23-24th, Velagapudi Ramakrishna Siddhartha Engineering College, Vijayawada, October 2019. |
| 4. |
Dr. K. Kishore Kumar, Associate Professor in Mechanical Engineering Department has served as a reviewer in International Journal of Applied Ceramic Technology in www. Wiley.com in November, 2019. |
| 5. |
Dr. K. Kishore Kumar, Associate Professor in Mechanical Engineering Department has served as a reviewer in Journal of Materials and manufacturing Processes, November 2019. |
| 6. |
Dr. M. Sowjanya, Professor in Mechanical Engineering Department published and presented a paper on Effect of River Morphology During Flood Water Flow – a CFD simulation in 24th HYDRO 2019 – INTERNATIONAL CONFERENCE, December 18-19, 2019, Osmania University, Hyderabad, December 2019. |
| 7. |
Dr. Shashidhar K Kudari, Professor in Mechanical Engineering Department participated as a delegate at the 7th International Conference on Transformations in Engineering Education (ICTIEE- 2020) organized by Anurag Group of Institutions, Hyderabad on 5th to 8th January, 2020. |
| 8. |
Dr. K. Kishore Kumar, Associate Professor in Mechanical Engineering Department has served as a reviewer in Journal of Materials and manufacturing Processes, February 2020. |
| 9. |
Dr. Kishore Kumar Kandi,Associate Professor in Mechanical Engineering Department, Ms. NagaveniThallapalli, Mr. Mayank Sunder and Mr. Rahul Vuda,Assistant Professor in Mechanical Engineering Departmentpresented and published a paper on “Design and Analysis of Cap Forward Armrest Component”, in the International conference on Advanced Lightweight Materials and Structures (ICALMS-2020), 6&7th March 2020, CMR Technical Campus, Hyderabad. |
Academic Year 2018-2019
| SLNO. | International Conferences |
| 1. | M. Sowjanya, Heat Transfer in the Cooling Wheel During Planar Flow Melt Spinning Process, Fifth International Conference on Computational Methods for Thermal Problems, THERMACOMP2018, July 9-11, 2018, Indian Institute of Science, Bangalore. |
| SLNO. | National Conferences |
| 1. | Mr.Neeraj Kumar Jha, Assoc. Prof. of Mechanical Department presented a paper on “Chemical treatment and analysis of mechanical properties of hybrid bio composite” at International conference, MRCET, Hyderabad on 22nd June2018. |
| 2. | M.R.S.Rupa Sri, G.VanyaSree, N.Ankitha, B.SravyaReddy, V.Lavanya, E.Geetha, P. Bhargavi, Mr. Sarat Kumar Sahoo, C. Sai Kiran, P. Srinivas Reddy, Assistant. Profs. of Mechanical Department, Neeraj Kumar Jha, Assoc. Prof. of Mechanical Department attended a 2- day workshop on “Engineering Graphics through Auto CAD”, organized by Department of Mechanical in CVR College of Engineering from 11th -15th June 2018. |
| 3. | Mr. Neeraj Kumar Jha, Assoc. Prof. Mr. P. Srinivas Reddy, Assistant. Prof. of Mechanical Department attended a 2- day workshop on “Emerging Trends in Mechanical Sciences”, organized by MRCET, Hyderabad, from 22-23rd June2018. |
| 4. | Ms. N. Ankitha, Ms. M. R. S. Rupa Sri, Ms. G. Vanya Sree, Asst. Prof. of Mechanical Department presented a paper on “Study of Filler Wires Effect on Weld Characteristics of Aluminium Alloy (6351) during Gas Tungsten Arc Welding (GTAW)” in International Conference on Research Advancements in Applied Engineering Sciences, Computer and Communication Technologies (ICRAAESCCT – 2018), 12th& 13th July 2018, BVRIT, Narsapur. |
| 5. | Mr. Sarat Kumar Sahoo, Assistant Professor of Mechanical Department participated and presented a paper on “Experimental investigation and multi-objective optimization of die sink EDM process parameter on inconel-625 alloy by using utility function approach” at International conference on advances in materials and manufacturing applications, Amrita Vishwa Vidyapeetham, Bengaluru, Karnataka,16 th-18th August2018. |
| 6. | Dr. B. K. Patle, Associate Professor of Mechanical Department participated and presented a paper on “Rule based funny decision path planning approach for mobile robot” at International conference on Computing, Communication controls Automation(IEEE), Pune16 th-17thAugust 2018. |
| 7. | Mr. Pathan Yasin, Assistant Prof. of Mechanical Department attended a 3- day Faculty Development Program on “IPR”, organized by NIMSE, Yousufguda, Hyderabad. from 23rd-28th August2018. |
| 8. | Mr. Neeraj Kumar Jha,Dr. B. K. Patle, Associate Professor, Mr. D. Rambabu Assistant Prof. Mechanical Department has attended a three-day workshop on “Hands on Experience with PLC & HMI-Mitsubishi Fa Learning Set Up “at CVRCE on 29th -31th, October 2018. |
Academic Year 2017-2018
| SLNO. | International Conferences |
| 1. | B.K Patle, T.G. Arul, ManjeethKharub, NitinGudadhe, Path planning for robots by cell decomposition, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 2. | B.K Patle, T.G. Arul, ManjeethKharub, NitinGudadhe, Path planning for robots by cell decomposition, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 3. | B.K Patle, T.G. Arul, ManjeethKharub, NitinGudadhe, Path planning for robots by cell decomposition, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 4. | VikkyKumhar, B.K Patle, OmprakashThakareT.G. Arul, Optimization of cutting parameters on turning process of using response surface methodology, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 5. | OmprakashThakare, B.K Patle, VikkyKumhar, Calibration of digital vernier caliper by using standard master gauge block set, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 6. | VikkyKumhar, B.K Patle, OmprakashThakareT.G. Arul, Optimization of cutting parameters on turning process of using response surface methodology, International Conference on Innovative Trends in Engineering Science and Management, 2017, MATS University, Raipur, India |
| 7. | Uma Maheshwera Reddy Paturi, Electrostatic solid lubricant coatings: optimization of process parameters and performance in tribological tests, 8th International conference on material and manufacturing technology (MM242), ICMMT 2017, 4-6th May 2017, Singapore |
| 8. | Uma Maheshwera Reddy Paturi, Application of regression and artificial neural network analysis in modeling of surface roughness in hard turning of AISI 52100 steel, 7th International conference on Material procession and characterization, ICMPC-2017, 17-19th March2017,GokarajuRangaraju Institute of Engineering & Technology,Telangana, India |
| 9. | SowjanyaMadireddi, Initial flow analysis of crucible nozzle during planar flow melt spinning process, International Conference on Polymer Processing and Characterization, November 2016, MG University, Kerala, India(Invited Talk) |
| SLNO. | National Conferences |
| 1. | ManjeetKharub, B. K. Patle and Gaurav Sharma (2017), The relationship between differentiation strategy and firm performance: a mediating role of quality management, Proceedings of the 1st National Conference on Innovative approaches in Mechanical Engineering. ISBN – 978-93-85101-96-0, St. Martin College of Engineering, 2017, Hyderabad, Telangana, India |
| 2. | ManjeetKharub, B. K. Patle and Gaurav Sharma (2017), The relationship between differentiation strategy and firm performance: a mediating role of quality management, Proceedings of the 1st National Conference on Innovative approaches in Mechanical Engineering. ISBN – 978-93-85101-96-0, St. Martin College of Engineering, 2017 Hyderabad,Telangana, India |
| 3. | T.G. Arul, Manimaran, Ranjith, SMED Implementation in a press shop, Nation Conference on Innovative Approaches in Mechanical Engineering, St. Martin College of Engineering, 2017 Hyderabad,Telangana, India |
| 4. | B.K. Patle, The relationship between diffentiation strategy and firm performance: a mediating role of quality management, Nation Conference on Innovative Approaches in Mechanical Engineering, St. Martin College of Engineering, 2017 Hyderabad, Telangana, India |
Academic Year 2016-2017
| SLNO. | International Conferences |
| 1. | M Sowjanya, An Analytical & Experimental Investigation of Planar flow Melts Spinning Process to manufacture amorphous ribbons, International Conference on Design and Production Engineering, 25-26th July 2016, Berline, Germany (Invited Talk) |
| 2. | SrikerKakustam, Suresh Kumar Reddy Narala, Uma Maheshwera Reddy Paturi, Investigations into the Effects of Different Constitutive Models in Finite Element Simulation of Machining, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA-2017, 17-19th August 2017, Amrita VishwaVidyapeetham, Bangalore, India |
| 3. | Nikhil M Thoppil, Kishore Kumar Kandi, N. Selvaraj, C.S.P. Rao, MGGP Modeling and Analysis of Gelcasting Preparation of Ceramics, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering Pune, Pune, India |
| 4. | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, Evaluation of friction and wear characteristics of electrostatic solid lubricant at different sliding conditions, 44th ICMCTF, 24th-28th April 2017, San Diego, California, USA. |
| 5. | Rakesh Kumar Gunda, Suresh Kumar Reddy Narala, New cooling approach for tool life improvement with minimal quantity solid lubricant machining of Ti-6Al-4V alloy, 6th International & 27th, AIMTDR, 2016, Pune, India. |
| 6. | ManjeetKharub; Bharti; Gaurav Sharma and Jagdeep Singh (2017), Status of Use of Internet and Soft Technology in Small Business, Emerging development in Engineering and Technology, Department of Civil and Mechanical Engineering, Shivalik College of Engineering, Dehradun, India |
| 7. | ManjeetKharub and Rajiv Sharma (2016) “The Relationship between Cost Leadership Strategy and Firm Performance: A Mediating Role of Quality Management”, 4th International conference on production and industrial engineering, CPIE-2016, Dr B.R Ambedkar NITJalandhar, Jalandhar, India |
| 8. | L Patnaik, S Kumar, Design and development of a special purpose machine for glass insertion in plastic frame for spill guard glass shelf assembly of commercial refrigerators, IEEE International conference on advances in Mechanical, Industrial, Automation and Management Systems, 2017, Motilal Nehru National Institute Of Technology Allahabad, India |
| 9. | L Patnaik, S Kumar, Switching from three simple tool to single progressive tool for web brake shoe production: A feasible study,FEAST 2017, National Institute of Technology, Tiruchirappalli, India |
| 10. | L Patnaik, S Kumar, Analysis and design of multi impression split core, finger cam operated mold for brass insert connector plug, International Conference on Frontiers in Engineering, Applications and Technology, 2017, National Institute of Technology, Tiruchirappalli, India |
| 11. | L Patnaik, S Kumar, Analysis and design of multi impression split core, finger cam operated mold for brass insert connector plug, International Conference on Frontiers in Engineering, Applications and Technology, 2017, National Institute of Technology, Tiruchirappalli, India |
| 12. | DipankarSaha,SravanamSushma, MallikarjunJalageri, Parametric optimization of TIG welding for M1020 using Taguchi-Grey relation based design method, International Conference on Emerging Trends in Engineering, and Science, 2017, Sphoorthi Engineering College, Telangana, India |
| 13. | L Patnaik, S Kumar, Design and development of a special purpose machine for glass insertion in plastic frame for spill guard glass shelf assembly of commercial refrigerators, IEEE International conference on advances in Mechanical, Industrial, Automation and Management Systems, 2017,Motilal Nehru National Institute Of Technology Allahabad, India |
| 14. | G. Mrudhula, BhargaviPokala, Sucharitha V, A. Krishnaiah, Effect of process parameters on friction stir welded aluminium alloy IS737, International conference on recent advances in materials mechanical and civil engineering, 2017, MarriLaxman Reddy Institute of Technology and Management, Telangana, India |
| 15. | G. Mrudhula, BhargaviPokala, Sucharitha V, A. Krishnaiah, Effect of process parameters on friction stir welded aluminium alloy IS737, International conference on recent advances in materials mechanical and civil engineering, 2017, MarriLaxman Reddy Institute of Technology and Management, Telangana, India |
| 16. | G. Mrudhula, BhargaviPokala, Sucharitha V, A. Krishnaiah, Effect of process parameters on friction stir welded aluminium alloy IS737, International conference on recent advances in materials mechanical and civil engineering, 2017, MarriLaxman Reddy Institute of Technology and Management, Telangana, India |
| 17. | SrikerKakustam, Suresh Kumar Reddy Narala, Uma Maheshwera Reddy Paturi, Investigations into the Effects of Different Constitutive Models in Finite Element Simulation of Machining, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA-2017, 17-19th August 2017, Amrita VishwaVidyapeetham, Bangalore, India |